Union #3G Smoother

Union #3G Smoother

• Length 8” base 9” with overhang
• Blade width 1 3/4”
• weight 2lbs 14 ozs

• An original Union 3G made with the patented lateral adjuster
• Note the “Patent Applied for” on the lateral.
  • According to PTAMPIA, this was part of the US Patent number 763,721 for the X series planes by John W. Carleton and George E. Trask both of New Britain, CT.
  • They would have been made subsequent to 1904
• Original Mahogany knob and tote have been refinished
• Original japanning

Additional Union Examples

Union #100 Squirrel tail Block Plane

Union #100 Squirrel tail Block Plane Additional Union Examples (My #100-032223-1)

Union #101. Block Plane - Thumb Plane

Union No. 101. Block Plane, 3 inches long, 1 inch Cutter The catalog states: "These Planes are small but well made, and are much esteemed by Toy Dealers,makers of Boys' Tool Chests, etc." These small planes are often referred to as thumb planes...

Union #110 Block Plane

Union #110 Block Plane Restored Additional Union Examples (My #U110-011223-1)

Union #110 Block Plane

Union #110 Block Plane Union #110 Block Plane with a Stanley Blade.This will make an excellent user or a good addition to a Union collection. Additional Union Examples (My #U-100924-1)

Union #120 Block Plane

Union #120 Block Plane I think the cap has been restored. Body is original.

Union #139 Knuckle Block Plane (Like Stanley #19)

Union #139 Knuckle Block Plane (Like Stanley #19) 7" long This plane did not work when I got it. I thought the teeth were worn off the lever that engages the blade, so I changed it. It still did not work. To make it work properly I had to shim...

Union #227 BLOCK PLANE

Union #227 Block Plan I believe this is a Union #227 with a replacement blade. Additional Union Examples

Union #3G Corrugated Smoothing Plane

Union #3G Corrugated Smoothing Plane Additional Union Examples (My #U3G-091017-1)

Union #3G Smoother

  Union #3G Smoother Length 8” base 9” with overhang Blade width 1 3/4” weight 2lbs 14 ozs   An original Union 3G made with the patented lateral adjuster Note the “Patent Applied for” on the lateral. According to PTAMPIA, this was part of...

Union #4 Smoother

Union #4 Smoother A little later Union, although not all parts are likely original. The tote and tote bolt may be from a war time Stanley or another line. The Plane itself is likely from after the Stanley acquisition. The Blade is the heavier (7/64")...

Union #4 Smoother

Union #4 Smoother This is an early Union smoother. Additional Union Examples

Union #41 T&G Plane

Union #41 T&G Plane Additional Union Examples (My #41-092722-1)

Union #4X Smoothing Plane

Union 4X Smoothing Plane Additional Union Examples

Union #5 Jack .(Early Real Union)

Union #5 Jack .(Early Real Union) This is an early Union plane with the original x-series type lateral adjuster. This plane has been completely restored (including stripping and refinishing) and tuned and sharpened as a jack. The iron is an original...

Union #5 Smoothing Plane

Union #5 Smoothing Plane Additional Union Examples

Union #5C Jack Plane

Union #5C Jack Plane A Union 5C Jack plane with a new Hocktools.com High Carbon Tool Steel (O1) Blade. The picture tell most of the story but note the repaired horn and the missing chunk from each side of the knob base. All-in-all this is a beautiful...

Union No. 138. Knuckle Block Plane

Union No. 138. Block PlaneKnuckle Joint Lever, 6 inches long, 1 3/4 inch Cutter Mouth adjustment cam is stamped patented applied for. Lateral is stamped Patent 8.3.97 Additional Union Examples (My...

________________

________________