Building a Infill Shoulder plane I while ago I picked up what I believe is a MATHIESON copy of a shoulder plane. I decided to […]
Building the dw Infill Shoulder plane
Continue reading
Category: My Plane Builds
Building the infill Plane. Not so much metal work style.
Building the infill Plane. A while ago I got a Sargent #422 (Stanley #7 size) that was cut from 22” down to 18”, frog was […]
Share this:
A #3 Size Infill.
Here is one of my masterpieces. This is a #3 size infill. Donor sole is a defiance #3. Wood is epoxied into the sole with […]
Share this:
The full size #4 dw Infill
Making an infill has been on my bucket list for quite some time now. Making tools to me is more of a hobby than the […]
Share this:
Small Scraper Plane (x 2)
Here are two small scraper planes, krenov style. The center body and rod is bloodwood on both. The one on the left has white oak […]
Share this:
York Pitch Shop make Smoother
For a while I’ve wanted to try a 55 degree high angle frog plane. I had thought about building one, but I’ve never really been […]
Share this:
Making the 2015 Toted Infill Smoother Part 7
Making the 2015 Toted Infill Smoother Part 6
I’m a bit impatient. I just had to try it out! The pins are through pinned. I start by peening one side, then moving to […]
Share this:
Making the 2015 Toted Infill Smoother Part 5
In deciding on a knob, I once again decided to make my own. i had an idea of what i wanted. So i took a […]
Share this:
Making the 2015 Toted Infill Smoother Part 4
Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 Part 7 <—–Previous —– Next—–>
