Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 Part 7 <—–Previous
Continue readingCategory: My Plane Builds
Making the 2015 Toted Infill Smoother Part 6
I’m a bit impatient. I just had to try it out! The pins are through pinned. I start by peening one side, then moving to […]
Continue readingMaking the 2015 Toted Infill Smoother Part 5
In deciding on a knob, I once again decided to make my own. i had an idea of what i wanted. So i took a […]
Continue readingMaking the 2015 Toted Infill Smoother Part 4
Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 Part 7 <—–Previous —– Next—–>
Continue readingMaking the 2015 Toted Infill Smoother Part 3
The cap is being shaped and formed. I chose a metal cap for this plane. If its your first, or you want to make […]
Continue readingMaking the 2015 Toted Infill Smoother Part 2
Next task was to tune the drill press. I wanted to drill the holes straight throught the base, so the drill press needed to be […]
Continue reading
Making the 2015 Toted Infill Smoother Part 1
I’ll start with an order of metal from Enco. 1/2″ thick for the base, and 1/8″ thick for the sides.Here is the Enco stock numbers415-1701 […]
Continue reading
Making the dw infills: Lets do some tapping and peening.
So another way to attach the sides is tapping and peening. I thought I’d give it a try on a small smoother. I decided on […]
Continue reading
Making of a Krenov Style Smoother
This plane will be a normal size smoother. If you like this article, you should look at this book! —> Since I agree with it […]
Continue reading