STANLEY #27 1/2 TRANSITIONAL – TYPE 16

I believe this is a L Bailey #12 Scraper - Pre- Stanley The blade is a replacement fashioned from a saw plate. Additional Stanley Examples (My #12-040424-1)

A repaired Stanley #1 (The second #1 shown is a WoodRiver) There are pictures of what it looked like before restoration and after. The body had been brazed. I had flattened it, spruced it up a bit and I used this plane for several years. The...

Note the cracked cheek Here are Stanley #1 Dimensions. https://www.timetestedtools.net/2021/05/16/stanley-number-1-hand-plane-dimensions/ Additional Stanley Examples My #1-090323-1...

The Stanley Gallery (My #12.5-101222-1)

STANLEY #12 Scraper Plane This came to me without a blade. I used a heavy saw blade to make a new blade. A previous user has added a rosewood sole. Based on the square nuts it was most likely done a long time ago. Tested on oak and maple ...

This SW Stanley #12 came to me as an ugly green painted base only. It's been stripped and repainted in my usual way. I turned a handle from spalted Maple. Finish on the maple is BLO. The blade is from a crosscut saw. It sharpened and hooked. ...

Stanley #190 Rabbet plane, 8"L, 1 1/2"W, 2 1/2lbs, 1886-1962.

Stanley #190 Rabbet plane, 8"L, 1 1/2"W, 2 1/2lbs, 1886-1962.

Stanley #191 Rabbet plane, 8"L, 1 1/4"W, 2 1/4lbs, 1886-1962. >

Stanley #2 Smoother

Stanley #2 Smoother Note the knob seems a little oversized for a #2. I thought about finding a smaller one, but if it's to be a user with someone with larger hands, it seems it would fit well. The orange frog makes it a little harder to find. ...

Stanley #2 Smoother This plane is a nice user #2. It has some pitting on one side and note the gnaw m arks on the cap. Nothing from keeping the plane from being a fine user for another 100 years. The rosewood is original and in excellent shape. ...

Stanley #2 Smoother It has a few imperfections, but nothing from making it a fantastic user. Look close at the photos. The flaws: the peened blade, the low knob, and the hang hole, are all user added, but all I did was give it a quick sharpening and...

Stanley #203 Bench Bracket Mainly used to hold a long board against the front of a workbench to facilitate planing the board's top edge. This one still has most of it's japanning. Example of Use    Stanley 203 Bracket typical usage.

Stanley #26 Transitional Jack Plane Type 6 1874-1884 Additional Stanley Examples (My #26-031923-4)

#27 1/2 Jack plane 15"L, 2 1/4"W, 4 3/4lbs, 1898-1934. Stanley (MY #27.5-081017-9)

Stanley #278 Rabbet Plan This is a dual-purpose plane - the primary function is to cut rabbets. Complete and in very good shape. A rare find. This is a dual-purpose plane - the primary function is to cut rabbets. The plane is ground on both sides so...

STANLEY #29 Transitional – Type 6 – Pre-lateral STANLEY  #29 Fore plane 20"L, 2 3/8"W, 6 1/4lbs, 1870-1918. //

Stanley #2C Smoother repaired front knob bolt

STANLEY #3 Smoother TYPE 4 Pre-Lateral STANLEY #3 Smooth plane, 8"L, 1 3/4"W, 3 1/8lbs, 1869-1984. A nice early example of the Stanley Bailey Jack. Original Japanning about 90% STANLEY #3 Smoother TYPE 4 Pre-Lateral //

STANLEY #37 Transitional – Type 9 Jenn STANLEY  #37 Jenny plane 13"L, 2 5/8"W, 5lbs, 1870-1923. excerpt from supertool.com - “The name "Jenny" is unique to this plane. Since this plane is slightly shorter than the metallic jack plane, a p...

Stanley #389 Jointer Fence

Stanley #45 Combination Plane with Partial set of cutters, Long and short rods and both fences Everything seems to work as it should Stanley Examples (My #45-091024-1)

Additional Stanley Examples (My #46-090620-1)

Stanley #48 SW T&G Plane  A complete Stanley Sweetheart  #48 Tongue and Groove Plane. Include original blades which are typically missing at lease one of them. As written on supertool.com:   “#48 Tonguing and Grooving P...

Stanley #48 Tonguing and Grooving Plane This is one of Stanley's better planes to use, and even the most ham-fisted power tool junkie can handle this plane and be amazed by its results. It works well, is practically indestructible, and is very versatile...

Stanley #49 Tonguing and Grooving Plane, 10"L (9"L 1937 on), 3/16"W, 2 3/4lbs, 1877-1944. This plane was not in great shape when I found it. Some of the nickel plating has been lost with time and the spring no longer works as it once did, but it...

Stanley #5 1/4 Junior Jack with Custom Aluminum Knob and original aluminum tote Additional Stanley Examples (My #525-020523-3)

Stanley #5 Jack (Blue) (adsbygoogle = window.adsbygoogle || []).push({ google_ad_client: "ca-pub-1267137695501695", enable_page_level_ads: true });

Stanley #5  Note the horn was missing and was repaired with my 3 part repair. It still has some paint spatters and japanning is about 70% Blade is sharpened with a camber for a jack plane note the brass replacement for a tote screw. I polished ...

Additional Stanley Examples (My #62-081520-1)

Note the replacement knobs and the irregular adjuster. This adjuster applies downward adjustments only. To raise the blade you would loosen the clamp and manually slide it against the knob. (a replacement adjuster knob could be found on any 71 or 71 1/2...

71 1/2 Router plane, 7 1/2"L, various widths, 2 1/8lbs, 1896-1949. Lightly cleaned and oiled. Additional Stanley Examples (My #71-080723-1)

71 Router plane, 7 1/2"L (7 5/8", 1962 on), various widths, 2 5/8lbs, 1885-1973. Lightly cleaned. Hardwood knobs lightly sanded and lacquered. Additional Stanley Examples (My# 71-080623-1)

71 Router plane, 7 1/2″L (7 5/8″, 1962 on), various widths, 2 5/8lbs, 1885-1973. Lightly cleaned, New knobs sanded and lacquered. One blade included Additional Stanley Examples (My #71-082823-1)

Stanley #71 Routing Plane Additional Stanley Examples (My #71-041824-1)

  Stanley #75 Bull Nose Rabbet Plane 4 1/8" Long - 1 1/16" blade (My #75-090520-1)

#78 Duplex filletster and rabbet plane, 8 1/2"L 1 1/2"W, 3lbs,       1885-1973. Excerpt for supertool.com "This is another popular Stanley plane, on which the company built a great fortune. Nearly every workman of the time had one of these planes in ...

Stanley #80 SW Scraper Plane or cabinet scraper Additional Stanley Examples (My #80-091424-7)

Replace wood on base (I believe it is oak) The Hock blade is a $30 value. Additional Stanley Examples (My #81-091424-9)

Stanley #9 1/2 Block Plane Type 2 Additional Stanley Examples (My #9.5-032023-1)

Stanley #9 1/2 Block Plane Type 2 (Red) I have had discussions about the red color. Some Stanley folks believe it was a special run from Stanley. Several have been observed. (My #9.5-032023-2)

Stanley #95 butt gauge  A Stanley No 95 Butt Gauge is Nickel plated cast iron and is used for marking rabbet jams, thickness of butts, mortises and marking, plus for squaring the edge of a butt hinge. - Additional ...

Stanley #A5 Jack Plane STANLEY #A5 Jack plane, 14"L, 2"W, 2 5/8lbs, 1925-1935. The bed and frog on the A5 are made from aluminum, which makes the plane lighter. This was the supposed appeal of these planes, that they are lighter than the iron...

Stanley #S4 Smoothing Plane offered 1869 - 1984 ..........................9" long with a 2" cutter Additional Stanley Examples (My #S4-031423-4)

STANLEY #S5 JACK This planes only shortcoming is most of the japanning is gone. You may be able to make out a brownish patina in the pictures. That is probably some kind of wax from the care of the previous owner. The blade is in excellent shape....

Stanley 5 1\4 Junior Jack Additional Stanley Examples (My #5.25-031523-5)