Upson Nut #29 Transitional Fore Plane

Shop Timetestedtool's tool Store

More on Upson Nut

https://www.timetestedtools.net/category/hand-planes/standard-rule-upson-nut/

20″ Long

2 3/8″ blade

Additional Upson Nut Examples

Instagram https://www.instagram.com/donwilwol/

About Time Tested Tools

I use my Systems Engineering skills to pay for the tool collecting and making hobbies. I've worked in the information technology field about 20 years. My career transition was from being self employed as a general contractor where I did a lot of custom...

Account

[ultimatemember_account]

Advertising Cuts of Anvils

1892 Illustrated Catalogue of Potts & Weber 1892 Illustrated Catalogue of Potts & Weber Caverhill Learmont and Co Hardware Catalogue 1901 Caverhill Learmont and Co Hardware Catalogue 1901 Caverhill Learmont and Co Hardware Catalogue 1901 Donegan...
Bedrock #4 1/2 Smoother Type 1-2

Bedrock #4 1/2 Smoother Type 1-2

Bedrock Type 1/2 #4 1/2 Smoother I used this type study https://virginiatoolworks.com/tools/stanley-planes/bed-rock-type-study/Type 1 Beds marked with Bailey model numbers (Nos.2 to 8.)Space below “PAT’D APR. 2. 95” was milled out at the factoryS casti...
Bedrock #603 Smoother

Bedrock #603 Smoother

Bedrock #603 Smoother Additional Bedrock Examples
Bedrock #604 Smoother

Bedrock #604 Smoother

I’ve been using this for several years now. It’s time to switch it out. The Pictures should tell the story. A new tote that I believe is the best looking tote I've made to date. I believe the Japanning is original and in great shape. I typically don...
Bedrock #605 1/2C Sweetheart Jack Plane

Bedrock #605 1/2C Sweetheart Jack Plane

Bedrock #605 1/2C Sweetheart  Jack Plane The tote has been repaired so the wood has been refinished. The japanning is original Additional Bedrock Examples (My #C-081820-1)
Bedrock #605 Flat Side Jack

Bedrock #605 Flat Side Jack

Bedrock #605 Flat Side Jack This #605 is from my user collection. The knob and tote I made from rosewood. Everything is in good shape. The blade is cambered, It’s been one of my go to jacks for a couple years now.  Just going to swap it out w...
Bedrock #605 Sweetheart Jack

Bedrock #605 Sweetheart Jack

Bedrock #605 Sweetheart Jack The pictures show the complete picture. Look close. Some minor pitting on the sole, a new rosewood tote. Sharpened with a very slight camber. Additional Bedrock Examples
Bedrock #606 Fore Plane

Bedrock #606 Fore Plane

Bedrock #606 Fore Plane I’ve been using this for a couple years now. It’s time to switch it out. The Pictures should tell the story. A new tote, repaired knob. It was stripped and restored a few years ago. A vintage Bedrock ready for some woodworking. ...
Bedrock #608C Jointer with Jointer Fence

Bedrock #608C Jointer with Jointer Fence

Bedrock #608C Jointer with Jointer Fence My Bedrock #608 came with 2 holes drilled in one side. Perfect for a fence, and I’m sure that’s why they were drilled. Additional Bedrock Examples
Birmingham "B" Plane #120 Block Plane

Birmingham "B" Plane #120 Block Plane

Birmingham "B" Plane #120 Block Plane Additional Birmingham Examples (My #120-030823-1)
Birmingham #120 Block Plane

Birmingham #120 Block Plane

Birmingham #120 Block Plane 7" Long 1 5/8" wide blade Additional Birmingham Examples
Birmingham #15 B Plane Block

Birmingham #15 B Plane Block

Birmingham B Plane Block (Similar to the Stanley #15, Like the #9 1/2 but longer) And Like the Birmingham #9 1/2 except for length. This plane has the US Patent: 401,532 Bench-Plane Edge-gripping Plane Cutter Lateral Adjuster 7" Long, 1 5/8" wide...
Birmingham #26 Transitional B Plane

Birmingham #26 Transitional B Plane

Birmingham #26 Transitional B Plane Additional Birmingham Post Additional Birmingham Examples
Birmingham #4 B Plane Smoother

Birmingham #4 B Plane Smoother

Birmingham #4 B Plane Smoother Other Birmingham information ---> Additional Birmingham Examples
Birmingham #4 B Plane Smoother

Birmingham #4 B Plane Smoother

Birmingham #4 B Plane Smoother Birmingham Planes ("B" Planes) Information Other Articles and post Additional Birmingham Examples (My #B4-0314232)
Birmingham #5 B Plane Jack

Birmingham #5 B Plane Jack

Birmingham #5 B Plane Jack This plane was stripped and refinished. Additional Birmingham Posthttps://www.timetestedtools.net/category/hand-planes/birmingham-or-b-planes/ Birmingham...
Birmingham B Plane with an Adjustable Mouth (AKA Derby #4 1/4)

Birmingham B Plane with an Adjustable Mouth (AKA Derby #4 1/4)

Something very very cool showed up in my mailbox today. This is a Birmingham B plane. Birmingham Plane Mfg Co made many cool planes, but this one seems to be undocumented. Here I've compared it to my #4 B Lane, and there is no doubt, this was a Birmingham...

Books

The Hand Tool Chronicles ---- My Authored Books ---- Vintage Tools Catalog Reprints ---- Vintage Tools Inventory Workbooks The Hand tool Chronicles are Photographic Presentation of Woodworking Hand Tools. If you have a woodworking...
A BEGINNERS GUIDE TO BENCH PLANES – THE POCKET GUIDE

A BEGINNERS GUIDE TO BENCH PLANES – THE POCKET GUIDE

Order On Amazon See all books by Don   Be sure to see the Expanded version as well You've Just Bought a Bench Plane. Congratulations. You have made an excellent investment in your woodworking future. If it's brand new, you will be the first to ...
D. R. Barton, A Glimpse of Early Edge Tools in Rochester NY

D. R. Barton, A Glimpse of Early Edge Tools in Rochester NY

Follow me on Amazon Buy on Amazon   In the mid to late 1800s, the D. R. Barton Company's names was familiar to almost every craftsman in the United States. It was established in 1832 and incorporated in 1875. It is still recognized as one of ...
SARGENT BENCH PLANE IDENTIFICATION GUIDE – THE #400/#5400/#1400 SERIES

SARGENT BENCH PLANE IDENTIFICATION GUIDE – THE #400/#5400/#1400 SERIES

Sargent Bench Plane Identification Guide - The #400/#5400/#1400 Series Order on Amazon Follow me on Amazon You can also Order on Amazon Sargent Bench Plane Identification Guide -The #400/#5400/#1400 Series Here is a list of all books and catalogs...
The Sargent Hand Plane Reference Guide for Collectors & Woodworkers - Second Edition

The Sargent Hand Plane Reference Guide for Collectors & Woodworkers - Second Edition

Order on Amazon   Follow me on Amazon  The Sargent Hand Plane Reference Guide for Collectors & Woodworkers - Second Edition   is an in-depth study of Sargent hand planes from the earliest patented designs to the end of...
With My Own Hands - A Beginners Guide to Bench Plane (Expanded version)

With My Own Hands - A Beginners Guide to Bench Plane (Expanded version)

Order Yours on Amazon Congratulations. You've Just Bought a Bench Plane. You have made an excellent investment in your woodworking future. If it's brand new, you will be the first to build its history. If it's one from an earlier time, you have...
With My Own Hands - Building a Krenov Style Hand Plane

With My Own Hands - Building a Krenov Style Hand Plane

With My Own Hands - Building a Krenov Style Hand Plane Order yours on Amazon In a world of heavy and expensive hand planes, making your own wood bodied hand planes makes them affordable, light in weight, low in friction, comfortable to use,...
With My Own Hands - How To Restore a Vintage Hand Plane for Woodworking

With My Own Hands - How To Restore a Vintage Hand Plane for Woodworking

Purchase it on Amazon This book shows the authors years of experience restoring vintage hand planes. The processes shown are meant to be a way to get neglected and rusted vintage hand planes (and possibly other tools) back to to nice looking and...
With My Own Hands - My Knife Making Journey

With My Own Hands - My Knife Making Journey

Order on Amazon A guide for new knife makers who want to experience knife making but do not know where to start. This book is designed to be picked up by any person who wishes to make a knife. It does not matter if the intent is to make one or two,...
With My Own Hands - Stock Removal Knife Making

With My Own Hands - Stock Removal Knife Making

With My Own Hands - Stock Removal Knife Making Order on Amazon
1911 Henry Disston & Sons

1911 Henry Disston & Sons

  Order on Amazon Follow me on Amazon     A reprint of the 241 page Henry Disston & Sons 1911 catalog showing the complete line of saws and other tools in the Disston line. . Tool collectors use original catalogs to identify...
1918 Henry Disston & Sons

1918 Henry Disston & Sons

Order on Amazon   Follow me on Amazon     A reprint of the 241 page Henry Disston & Sons 1918 catalog showing the complete line of saws and other tools in the Disston line. . Tool collectors use original catalogs to identify the vintage to...
Buffalo Forge Co Catalog No 801 1929

Buffalo Forge Co Catalog No 801 1929

. (adsbygoogle = window.adsbygoogle || []).push({});
Catalog Cuts of Early American Hand Saws

Catalog Cuts of Early American Hand Saws

Order on Amazon Follow me on Amazon     For those saw collector who have American saws, these catalog cuts are from the top four early manufacturers. Henry Disston & Sons (1918), E. C. Atkins & Company Catalog No. 19 (1923), Simonds S...
Catalog excerpts of Early American  Blacksmith Forges  & Tools

Catalog excerpts of Early American Blacksmith Forges & Tools

Order on Amazon Follow me on Amazon A reprint of the publication Catalogs Excerpts of the General Catalog of Buffalo Forge 1892, Illustrated Catalog of the Keystone Portable Forges, Champion Blower & Forge Co. 1907, The Novelty Portable Forges...
Catalogue and Price list The L&I.J. White Company Edge Tools

Catalogue and Price list The L&I.J. White Company Edge Tools

Order directly on Amazon Follow me on Amazon     This publication is a reprint of the “Catalog and Price list The L&I.J. White Company Edge Tools, Buffalo, NY”. This 1905 Edition of 64 pages measures 8 inches in height by 5 inches in ...
Champion Blower & Forge Co. Lancaster PA. USA 1907 Catalog Reprint

Champion Blower & Forge Co. Lancaster PA. USA 1907 Catalog Reprint

  Order directly on Amazon   Follow me on Amazon   A reprint of the 232 page “Champion Blower & Forge Co. Lancaster PA. USA 1907” descriptive catalog showing the complete line of Champion Blowers, Forges, and other equipment fro...
Crescent  Wood-Working  Machinery  1909

Crescent Wood-Working Machinery 1909

Order on Amazon   Follow me on Amazon   A reprint of the 84 page “Crescent  Wood-Working  Machinery  1909”  catalog showing the complete line of powered woodworking machinery. Tool collectors use ori...
Disston - THE SAW IN HISTORY

Disston - THE SAW IN HISTORY

  If Timetestedtools is out of stock order directly on Amazon Follow me on Amazon   This is a reprint of "THE SAW IN HISTORY" by Henry Disston $ Sons first published in 1915. A comprehensive description of the development of this most useful of...
Disston Handbook on Saws

Disston Handbook on Saws

Order on Amazon Follow me on Amazon     1919 Disston Handbook on Saws Reprint. A reprint of the publication HANDBOOK ON SAWS by Henry Disston & Sons, Philadelphia, Pennsylvania. This is an April, 1919 Edition of 209 pages. The book is filled w...
E.C. Atkins & Company  Saws, Saw Tools and Machine Knives No 19 1923 catalog

E.C. Atkins & Company Saws, Saw Tools and Machine Knives No 19 1923 catalog

  Order on Amazon   Follow me on Amazon   A reprint of the 269 page E.C. Atkins & Company  Saws, Saw Tools and Machine Knives No 19 1923 catalog showing the complete line of saws and other tools in the E.C. Atkins line....
Edge Tools The L&I.J. White Company (1909)

Edge Tools The L&I.J. White Company (1909)

Order on Amazon This publication is a reprint of the “Catalog and Price list The L&I.J. White Company Edge Tools, Buffalo, NY”. This 1909 Edition of 174 pages measures 9 inches in height by 6 inches in width. The book is filled with tools and...
Hibbard, Spencer, Bartlett & Co. Catalog No. 60 Hand Tool Excerpt

Hibbard, Spencer, Bartlett & Co. Catalog No. 60 Hand Tool Excerpt

Hibbard, Spencer, Bartlett & Co. Catalog No. 60 Hand Tool Excerpt This book is printed in three versions: Order on Amazon - Hard cover-with seven full page color photos , Paper back-with seven full page color photos and Paper back-Black &...
Illustrated Catalogue and Price List of Carpenter Tools  J. B. Shannon Philadelphia

Illustrated Catalogue and Price List of Carpenter Tools J. B. Shannon Philadelphia

Order directly on Amazon Follow me on Amazon     This publication is a reprint of the “Illustrated Catalogue and Price List of Carpenter Tools  J. B. Shannon Philadelphia" ”. This August 1873 Edition of 108 pages measures 9 inches in height by 6 i...
Iron City Tool Works Catalog

Iron City Tool Works Catalog

  Order on Amazon     A reprint of the publication “Iron City Tool Works Pittsburgh, USA”. This Edition is dated January 1920.This catalog is a wealth of information about the tools, equipment and hardware of the time. The reprint is 96 pages ...
Lathes Manufactured By W. F. & John BARNES Co.

Lathes Manufactured By W. F. & John BARNES Co.

  Order directly on Amazon Follow me on Amazon   A reprint of the 30 page “Lathes Manufactured By W. F. & John BARNES Co.” descriptive catalogue showing the complete line of hand and foot powered lathes. Tool collectors use ori...
Patented Foot and Hand Powered Wood Working Machinery

Patented Foot and Hand Powered Wood Working Machinery

  order directly on Amazon Follow me on Amazon   A reprint of the 43 page “Patented Foot and Hand Powered Wood Working Machinery Manufactured By W. F. & John BARNES Co.” descriptive catalogue and Price List showing the complete line of ha...
Reprint of the Simonds Mfg Co's Publications

Reprint of the Simonds Mfg Co's Publications

Order On Amazon Reprint of the Simonds Mfg Co’s How to File A Hand Saw (1916) & Simonds Guide For Carpenters (1914).. The first reprint, What Is a Hand Saw? This little book of five lessons is intended as a primer, setting forth briefly and clearly t...
Sargent & Co. 1869 Price Book

Sargent & Co. 1869 Price Book

Order on Amazon Printed in Hard cover or paper back A reprint of the publication Sargent & Co. 1869 Price Book (reprinted Catalog). This is an 1869 Edition of 446 pages. The book is filled Hardware, locks and other tools. This catalogue shows...
SARGENT 1913 HAND PLANE CATALOG REPRINT

SARGENT 1913 HAND PLANE CATALOG REPRINT

Order On Amazon   A reprint of the 1913 catalog, "Sargent VBM Wood Bottom And Iron Planes For First Class Mechanics".Tool collectors use original catalogs to identify the vintage tools they find. Since the original catalog are sometimes difficult ...
The Disston Saw, Tool and File Book

The Disston Saw, Tool and File Book

  Order on Amazon Follow me on Amazon     A reprint of the publication The Disston Saw, Tool and File Book by Henry Disston & Sons, Philadelphia, Pennsylvania. This is a 1922 Edition of 40 pages. The book is filled with tips...
The James Swan Company’s Premium Mechanics’ Tools

The James Swan Company’s Premium Mechanics’ Tools

Order on Amazon Follow me on Amazon A reprint of the publication “The James Swan Company’s Premium Mechanics’ Tools”. This Edition is dated January 1904.This catalog is a wealth of information about James Swan’s tools, and equipment of the time....
The Red Book Manual Training ORR & LOCKETT CO. CHICAGO: Benches and Tools

The Red Book Manual Training ORR & LOCKETT CO. CHICAGO: Benches and Tools

Order directly on Amazon   Follow me on Amazon   A reprint of the publication “The Red Book Manual Training ORR & LOCKETT CO. CHICAGO Benches and Tools by Orr & Lockett Hardware Co. 14-16 w. Randolph Street Chicago”. This Edi...
The Simonds Manufacturing Co.    Publications & Catalog Cuts of Hand Saw Sections 1904-1923

The Simonds Manufacturing Co.    Publications & Catalog Cuts of Hand Saw Sections 1904-1923

Order on Amazon For those saw collector who The Simonds Manufacturing Co. these publication reprints and catalog cuts are from the The Simonds Manufacturing Co. catalogs. The list includes, -- Simonds Saws and Knives 1904 Catalog Cut, -- Seventy-five...
Tools for Coopers and Gaugers Produce Triers A. F. Brombacher & Co. Catalogue No. 15 (1922)

Tools for Coopers and Gaugers Produce Triers A. F. Brombacher & Co. Catalogue No. 15 (1922)

  Order on Amazon   Follow me on Amazon   A reprint of the 34 page “Tools for Coopers and Gaugers Produce Triers, A. F. Brombacher & Co.”  catalog showing the complete line of Coopers tools. Tool collectors use ori...
Tredway Hardware Co. Dubuque, Iowa

Tredway Hardware Co. Dubuque, Iowa

Order on Amazon Follow me on Amazon A reprint of the publication Catalog Tredway Hardware Co. Dubuque, Iowa. This March 15, 1895 Edition of 224 pages is filled with tools and prices from the 1895-time frame. Tool collectors use original catalogs...
Wm. P. Walter's Sons: Catalog of Wood Workers’ Tools 1888 reprint

Wm. P. Walter's Sons: Catalog of Wood Workers’ Tools 1888 reprint

  Order Directly on Amazon Follow me on Amazon   A reprint of the publication Catalog and Price list Wm. P. Walter's Sons, 1233 Market Street – Philadelphia, Catalog of Wood Workers’ Tools. This 1888 Edition of 200 pages is filled wit...
Chaplin #1208 Jack Plane

Chaplin #1208 Jack Plane

Chaplin #1208 Jack Plane 18" long, 2" blade Brown checkered rubber tote. More Chaplin info here--> And of course http://www.petermcbride.com/chaplin/ is most useful. _ Additional Chaplin Examples
Chaplin #15 Block Plane

Chaplin #15 Block Plane

Chaplin #15 Block Plane To the best of my research this is a #15 block plane. A fixed throat and japanned A great collector piece and in good enough shape to sharpen and use if desired. More Chaplin info here --> And of course http://www.petermcbride.com/chaplin/...
Chaplin #15 Block Plane

Chaplin #15 Block Plane

Chaplin #15 Block Plane To the best of my research this is a #15 block plane. A fixed throat and japanned A great collector piece and in good enough shape to sharpen and use if desired. More Chaplin info here–> And of course http://www.petermcbride.com/chaplin/ &...
Chaplin #20 Block Plane

Chaplin #20 Block Plane

Chaplin #20 Block Plane (at first I thought this was a #30, but i don't think it was nickel plated. I think it's a #20 with almost all of the japanning gone. There are still a few spots visible) To the best of my research this is a #20 block plane. A...
Chaplin #20 Block Plane

Chaplin #20 Block Plane

Chaplin #20 Block Plane To the best of my research this a #20. The difference between the #20 and the #30 is the finish. The #20 was japanned and the #30 was nickel plated. If i had to guess, I would say this originally had the red japan. More Chaplin...
Chaplin #77 Transitional Jack Plane

Chaplin #77 Transitional Jack Plane

Chaplin #77 Transitional Jack Plane (Same size as a Stanley #27) More Chaplin info here --> And of course http://www.petermcbride.com/chaplin/ is most useful. Additional Chaplin Examples
Chaplin’s  #1205 Original Patent

Chaplin’s #1205 Original Patent

Chaplin’s Original Patent #1205 9″ long, 2″ blade wood tote. This plane is in nice condition. More Chaplin info here --> And of course http://www.petermcbride.com/chaplin/ is most useful.   Additional Chaplin Exampl...
Chaplin’s Improved Patent #1205

Chaplin’s Improved Patent #1205

Chaplin’s Improved Patent #1205 9″ long, 2″ blade Black checkered rubber tote. More Chaplin info here --> And of course http://www.petermcbride.com/chaplin/ is most useful.   Additional Chaplin Examples ...
Chaplin’s Improved Patent #1208

Chaplin’s Improved Patent #1208

Chaplin’s Improved Patent #1208 18″ long, 2″ blade Black checkered rubber tote. (Broken horn) The base of this plane has been stripped and repainted. More Chaplin info here https://www.timetestedtools.net/category/hand-planes/chaplin/ And of cours...
The Hand Plane Collection Chronicles - First Edition - The Mark Nickel’s Collection

The Hand Plane Collection Chronicles - First Edition - The Mark Nickel’s Collection

Order on Amazon The Hand Plane Collection Chronicles - First Edition - The Mark Nickel’s Collection Hand Plane and tool enthusiast have been waiting for this. "The Hand Plane Collection Chronicles" is now available. "The Hand Plane Collection C...
The Hand Tool Chronicles -  Hazard Knowles, Birdsill Holly & Leonard Bailey - Edition No. 8        

The Hand Tool Chronicles -  Hazard Knowles, Birdsill Holly & Leonard Bailey - Edition No. 8        

Available on Amazon   A Photographic Presentation of Woodworking Hand Tools This is the 8th publication of a series of chronicles which will be Photographic Presentations of Woodworking Hand Tools with descriptions, informative articles...
The Hand Tool Chronicles - A Time Tested Tools Collection - Edition No. 15

The Hand Tool Chronicles - A Time Tested Tools Collection - Edition No. 15

Coming Soon for Purchase on Amazon  This is the fifteenth publication of a series of chronicles which will be a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition “The H...
The Hand Tool Chronicles - Fifth Edition – Spokeshaves with Jim McGie

The Hand Tool Chronicles - Fifth Edition – Spokeshaves with Jim McGie

The Hand Tool Chronicles - Fifth Edition – Spokeshaves with Jim McGie Available on Amazon.com This is the fifth publication of a series of chronicles which will be a Photographic Presentation of Woodworking Hand Tools with descriptions, i...
The Hand Tool Chronicles - Fourth Edition – Vintage Hand Saws With Mike Stemple

The Hand Tool Chronicles - Fourth Edition – Vintage Hand Saws With Mike Stemple

Purchase ON AMAZON  This is the Fourth publication of a series of chronicles which will be a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition “The Hand Tool Chronicles -...
The Hand Tool Chronicles - Second Edition - A Jim Bode Selection

The Hand Tool Chronicles - Second Edition - A Jim Bode Selection

Purchase on Amazon This is the Second publication of a series of chronicles which will be a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition is an a selection of vintage...
The Hand Tool Chronicles - Sixth Edition - Traditional Ozark Tools & Techniques With James E. Price Part 1

The Hand Tool Chronicles - Sixth Edition - Traditional Ozark Tools & Techniques With James E. Price Part 1

The Hand Tool Chronicles - Sixth Edition - Traditional Ozark Tools & Techniques With James E. Price Part 1 Purchase on Amazon This is the sixth publication of a series of chronicles which will be a Photographic Presentation of Woodworking...
The Hand Tool Chronicles - The Artistry and Craftsmanship of Terry Ragon - Edition No. 14

The Hand Tool Chronicles - The Artistry and Craftsmanship of Terry Ragon - Edition No. 14

Buy on Amazon This is the Fourteenth publication of a series of chronicles which will be a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition “The Hand Tool Chronicles -...
The Hand Tool Chronicles - The Humble Screwdriver & Turnscrew - Edition 12

The Hand Tool Chronicles - The Humble Screwdriver & Turnscrew - Edition 12

Purchase on Amazon This is the Twelfth publication of a series of chronicles which is a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition “The Hand Tool Chronicles - The H...
The Hand Tool Chronicles - Third Edition - Vintage Boring & Drilling Tools With James E. Price

The Hand Tool Chronicles - Third Edition - Vintage Boring & Drilling Tools With James E. Price

Purchase ON AMAZON This is the Third publication of a series of chronicles which will be a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition is an a selection of vintage...
The Hand Tool Chronicles - Traditional Ozark Tools & Techniques With James E. Price Part 2   Edition No. 9

The Hand Tool Chronicles - Traditional Ozark Tools & Techniques With James E. Price Part 2 Edition No. 9

Coming Soon This is the Ninth publication of a series of chronicles which will be a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition “The Hand Tool Chronicles - Sixth E...
The Hand Tool Chronicles - Traditional Ozark Tools & Techniques With James E. Price Part 3 Edition No. 11

The Hand Tool Chronicles - Traditional Ozark Tools & Techniques With James E. Price Part 3 Edition No. 11

Available on Amazon This is the Eleventh publication of a series of chronicles which is a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition “The Hand Tool Chronicles - T...
The Hand Tool Chronicles - Vintage Hand Saws With Mike Stemple Part 2 - <strong>Edition No. 13</strong>

The Hand Tool Chronicles - Vintage Hand Saws With Mike Stemple Part 2 - Edition No. 13

Purchase on Amazon This is the thirteenth publication of a series of chronicles which is a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition “The Hand Tool Chronicles -...
The Hand Tool Chronicles– Hand Saws by Charlie Earnest Edition No. 10

The Hand Tool Chronicles– Hand Saws by Charlie Earnest Edition No. 10

Order on Amazon This is Edition #10 of The Hand Tool Chronicles which is a series of publications which will be a Photographic Presentation of Woodworking Hand Tools with descriptions, informative articles and expert opinions. This edition “The H...
The Hand Tool Chronicles– Spokeshaves with Jim McGie Part 2  Edition No. 7

The Hand Tool Chronicles– Spokeshaves with Jim McGie Part 2 Edition No. 7

Purchase it on Amazon   The Hand Tool Chronicles– Spokeshaves with Jim McGie Part 2 Edition No. 7 This is Edition #7  of The Hand Tool Chronicles which is a series of publications which will be a Photographic Presentation of Woodworking H...
Consolidated Tool #5 Jack Plane

Consolidated Tool #5 Jack Plane

From Rob Morgan's collection More Consolidated tool examples
Consolidated Tool #5C Jack Plane

Consolidated Tool #5C Jack Plane

Length 13 3/4″Weight 4# 8 oz The Consolidated Tool Works  is recorded as having done business in New York City from 1890 into the 1920s. Their mark featured a ships’ helm wheel, and is quite distinctive. They also used the brand name, “Simplex.” Consoli...
Bedrock #603 Cut-Away Display Type 7

Bedrock #603 Cut-Away Display Type 7

Bedrock #603 Cut-Away Display Type 7 Display Examples (My #603-031123-14)
Bedrock #604 Cut-Away Display

Bedrock #604 Cut-Away Display

Bedrock #604 Cut-Away Display Display Examples (My #604D-031123-18)
Bedrock #604 Cut-Away Display Type 3

Bedrock #604 Cut-Away Display Type 3

Bedrock #604 Cut-Away Display Type 3 Display Examples (My #603D-031123-16)
Ohio Tools #04 Cut-Away Display

Ohio Tools #04 Cut-Away Display

Ohio Tools #04 Cut-Away Display Display Examples (My #04-031123-17)
Ohio Tools #04 Cut-Away Display

Ohio Tools #04 Cut-Away Display

Ohio Tools #04 Cut-Away Display Display Examples (My #04-031223-1)
Sargent #408 Type 2 Cut-Away Display

Sargent #408 Type 2 Cut-Away Display

Sargent #408 Type 2 Cut-Away Display Display Examples (My #10-2015)
Stanley #3 type 7 Cut-Away Display

Stanley #3 type 7 Cut-Away Display

Stanley #3 type 7 Cut-Away Display Display Examples (My #3-031323-1)
Stanley #4 Cut-Away Display Type 16

Stanley #4 Cut-Away Display Type 16

Stanley #4 Cut-Away Display Type 16 Display Examples (My #4D-031123-15)
Stanley #4 type 11 Cut-Away Display

Stanley #4 type 11 Cut-Away Display

Stanley #4 type 11 Cut-Away Display Display Examples (My #4-031323-2)
Stanley #4C type 9 Cut-Away Display

Stanley #4C type 9 Cut-Away Display

Stanley #4C type 9 Cut-Away Display Display Examples (My #4D-091723-1)
Stanley #5 1/4 Cut-Away-Display

Stanley #5 1/4 Cut-Away-Display

Stanley #5 1/4 Cut-Away-Display Display Examples (My #D-10012015)
Stanley #5 Cut-Away Display Type 16

Stanley #5 Cut-Away Display Type 16

Display Examples (My #5D-031123-12)
Edwin Hahn #12

Edwin Hahn #12

Edwin Hahn is one of the Wilkes-Barre PA plane makers. John Rumpf wrote an excellent book on the subject titled Plane Makers of Wikes-Barre, Pennsylvania: Jacob Siegley, Edwin Hahn, Keystone Tool Works which includes Jacob Siegley, Edwin Hahn and the...
Edwin Hahn #14 Jointer

Edwin Hahn #14 Jointer

Edwin Hahn #14 Jointer 24" long 2 5/8" wide blade. 6# 4oz. Note in the 6th picture there is normally two wings on each side of the lateral adjuster that help hold the blade. One was broke so I removed the other to make it even. It doesn't seem to have...
Edwin Hahn #9 Fore Plane

Edwin Hahn #9 Fore Plane

Edwin Hahn is one of the Wilkes-Barre PA plane makers. John Rumpf wrote an excellent book on the subject titled Plane Makers of Wikes-Barre, Pennsylvania: Jacob Siegley, Edwin Hahn, Keystone Tool Works which includes Jacob Siegley, Edwin Hahn and the...
Gage Examples

Gage Examples

John Gage was issued his patent No. 323,804 on Aug 4th 1885. The Gage tool Co in Vineland NJ only made a wood based transitional plane. When Stanley bought the company in 1919 they started producing the metallic planes.
Gage (Stanley made) #G6 Fore

Gage (Stanley made) #G6 Fore

Gage (Stanley made) #G6 Fore This is the fore plane of the Stanley Gage Self Setting Planes. This plane is in great shape for its age but there are a few details that must be pointed out: (please see the pics) The tote has been repaired and there is...
GAGE #14 Fore

GAGE #14 Fore

See other planers listed for more information https://www.timetestedtools.net/?s=gage Additional Gage Examples
GAGE #16 Fore Plane

GAGE #16 Fore Plane

See other planers listed for more information https://www.timetestedtools.net/?s=gage Additional Gage Examples
Gage #4 Smoother

Gage #4 Smoother

Gage #4 Smoother John Gage was issued his patent No. 323,804 on Aug 4th 1885. The Gage tool Co in Vineland NJ only made a wood based transitional plane. When Stanley bought the company in 1919 they started producing the metallic planes. This particular...
GAGE #4 SMOOTHER With Breakdown

GAGE #4 SMOOTHER With Breakdown

John Gage was issued his patent No. 323,804 on Aug 4th 1885. The Gage tool Co in Vineland NJ only made a wood based transitional plane. When Stanley bought the company in 1919 they started producing the metallic planes. ...
Gage #G35 Smoothing Plane

Gage #G35 Smoothing Plane

Gage #G35 Smoothing Plane length is 10" Width of blade is 2" it weighs 2# 11oz Additional Gage Examples
Gage G6 Fore Plane (by Stanley)

Gage G6 Fore Plane (by Stanley)

From Rob Morgan's Collection More Consolidated Tool Examples
Gage G6 with Breakdown

Gage G6 with Breakdown

See other planers listed for more information https://www.timetestedtools.net/?s=gage Additional Gage Examples
Restored Gage #G7

Restored Gage #G7

See other planers listed for more information https://www.timetestedtools.net/?s=gage Additional Gage Examples

Hand Forged Items

Hand Forged Items [product_category category="Hand Forged Items" number=30 per_page=30] Hand Forged Knives and Hatchets [product_category category="Hand Forged" number=30 per_page=30]
Hay-Budden Mfg Co 1914 Catalogue

Hay-Budden Mfg Co 1914 Catalogue

Hay-Budden Mfg Co 1914 Catalogue Hay-Budden Mfg Co 1914 Catalogue Hay-Budden Mfg Co 1914 Catalogue Hay-Budden Mfg Co 1914 Catalogue Hay-Budden Mfg Co 1914 Catalogue Hay-Budden Mfg Co 1914 Catalogue Hay-Budden Mfg Co 1914 Catalogue Hay-Budden...

Help Keep Timetestedtools alive

Even the smallest of donations help. If you find this site helpful, Please help keep it going. Thank You very much
Home

Home

Instagram https://www.instagram.com/donwilwol/
The Disston Hand Saw Pocket Inventory Workbook

The Disston Hand Saw Pocket Inventory Workbook

  Order on Amazon Follow me on Amazon   This book is sized to be carried in the field while at the flea markets, antique shops or auctions. Keeping track of your collection is an important task for your collection. As the collection...
THE HAND PLANE INVENTORY WORKBOOK

THE HAND PLANE INVENTORY WORKBOOK

Order On Amazon See All Books By Don The Hand Plane Inventory Workbook Keeping track of your collection is an important task in your collection. As the collection grows, you should keep track of the pieces you purchase. The information...
The Hand Saw Pocket Inventory Workbook

The Hand Saw Pocket Inventory Workbook

Ordered on AMAZON See All Books By Don The Hand Saw Pocket Inventory Workbook This book is sized to be carried in the field while at the flea markets, antique shops or auctions. Keeping track of your collection is an important task...
THE OHIO TOOLS HAND PLANE INVENTORY WORKBOOK (THE FULL SIZE BOOK)

THE OHIO TOOLS HAND PLANE INVENTORY WORKBOOK (THE FULL SIZE BOOK)

Order on Amazon See all books by Don Keeping track of your collection is an important task in your collection. Although this workbook is written for your Ohio Tools collection, you can also use the extra spaces for other pieces in your collection....
THE OHIO TOOLS HAND PLANE POCKET INVENTORY WORKBOOK

THE OHIO TOOLS HAND PLANE POCKET INVENTORY WORKBOOK

To order see AMAZON See All Books By Don The Ohio Tools Hand Plane Pocket Inventory Workbook This book is sized to be carried in the field while at the flea markets, antique shops or auctions. Keeping track of your collection is an important task...
The Sargent Hand Plane Pocket Inventory Workbook

The Sargent Hand Plane Pocket Inventory Workbook

Order on Amazon See All Books By Don The Sargent Hand Plane Pocket Inventory Workbook This book is sized to be carried in the field while at the flea markets, antique shops or auctions. Keeping track of your collection is an important part of collecting...
The Stanley Hand Plane Inventory Workbook

The Stanley Hand Plane Inventory Workbook

Order on Amazon The Stanley Hand Plane Inventory Workbook Keeping track of your collection is an important task in your collection. As the collection grows, you should keep track of the pieces you purchase. The information recorded can be used for...
THE STANLEY HAND PLANE POCKET INVENTORY WORKBOOK

THE STANLEY HAND PLANE POCKET INVENTORY WORKBOOK

Order on Amazon See All Books By Don The Stanley Hand Plane Pocket Inventory Workbook This book is sized to be carried in the field while at the flea markets, antique shops or auctions. Keeping track of your collection is an important task for your...
The Union Hand Plane Inventory Workbook

The Union Hand Plane Inventory Workbook

Order on Amazon The Union Hand Plane Inventory Workbook See all books by Don      Follow me on Amazon Keeping track of your collection is an important task in your collection. This workbook is a collection and listing of all Union...
THE UNION HAND PLANE POCKET INVENTORY WORKBOOK

THE UNION HAND PLANE POCKET INVENTORY WORKBOOK

The Union Hand Plane Pocket Inventory Workbook Order on Amazon See all books by Don   This book is sized to be carried in the field while at the flea markets, antique shops or auctions. Keeping track of your collection is an important task...
Vintage Stanley-Sargent-Union-Ohio Tools Hand Plane Inventory Workbook

Vintage Stanley-Sargent-Union-Ohio Tools Hand Plane Inventory Workbook

Keeping track of your collection is an important task in your collection. As the collection grows, you should keep track of the pieces you purchase. The information recorded can be used for future references for many reasons. Sometimes it’s important i...
A Type 6 Siegley No. 4 Restore

A Type 6 Siegley No. 4 Restore

Back to Siegley History A Type 6 Siegley No. 4 circa 1896. It’s a pre-lateral and well before Stanley bought him out. Some before restoration pictures After the restoration The checkering has been hand cut. ...
Siegley #10 type 9

Siegley #10 type 9

Siegley #10 type 9 (based on “Plane Makers of Wikes-Barre, Pennsylvania: Jacob Siegley, Edwin Hahn, Keystone Tool Works ” By John F. Rumpf) Back to Jacob Siegley Hand Planes Siegley Hand Planes Stanley Sie...
Siegley #2 Combination Plane – type 4

Siegley #2 Combination Plane – type 4

Siegley #2 Combination Plane – type 4 1884-1888 Jacob Siegley Hand Plane Examples (My #2-030923-1)
Siegley #2 Plow Plane

Siegley #2 Plow Plane

Siegley #2 Plow Plane I believe it is a type 10 Additional Jacob Siegley Hand Plane Examples (My #2-030823-3)
Siegley #3 type 1 Partial

Siegley #3 type 1 Partial

I don't usually post partial planes or parts planes, but this is rare enough I decided to make an exception. Both the cutter adjuster and the throat plate are damaged and it is missing the cutter and the cap. But the only other time I've seen...
Siegley #3 Type 12

Siegley #3 Type 12

This is a Siegley #3 type 12, which puts it about 1900 = 1901 according to “Plane Makers of Wikes-Barre, Pennsylvania: Jacob Siegley, Edwin Hahn, Keystone Tool Works ” This was probably one of the last runs Jacob Siegley before Stanley bought him...

Keen Kutter Examples

Keen Kutter Planes and what I know about them.
Keen Kutter #K7

Keen Kutter #K7

Keen Kutter Planes and what I know about them. Additional Keen Kutter Examples
Keen Kutter #KK32 Transitional Jointer

Keen Kutter #KK32 Transitional Jointer

Keen Kutter Planes and what I know about them. Additional Keen Kutter Examples
Keen Kutter KK #414C Sargent made

Keen Kutter KK #414C Sargent made

Keen Kutter Planes and what I know about them. Additional Keen Kutter examples
Keen Kutter Sargent made #414 Jack Plane

Keen Kutter Sargent made #414 Jack Plane

Keen Kutter Sargent made #414 Jack Plane https://www.timetestedtools.net/2017/02/13/keen-kutter-planes-and-what-i-know-about-them/ (My #414-031123-7)
Keen Kutter with Eye Logo

Keen Kutter with Eye Logo

Keen Kutter with Eye Logo Keen Kutter Planes and what I know about them. Additional Keen Kutter Examples
Sargent Made Keen Kutter #4

Sargent Made Keen Kutter #4

Sargent Made Keen Kutter #4 Keen Kutter Planes and what I know about them. Additional Keen Kutter examples
Columba #6 Fore Plane

Columba #6 Fore Plane

This was possibly made in the Union Factory after Stanley bought Union From the collection of Chris Congleton. According to PTAMPIA Columbia was made by Stanley & Others In 1925 they were sold by Coloumbia Wood Tool Mfg Co. NYC, Also...
Famport - Possibly Consolidated Tool made Smoother

Famport - Possibly Consolidated Tool made Smoother

Famport Tool Works NY - Possibly Consolidated Tool made Smoother There is some speculation that Consolidated Tool may have bought parts from Sargent. There are some similarities and some big differences. The brass is 13/32" which is typical...
New York Tools Works #4 Smoother

New York Tools Works #4 Smoother

New York Tools Works #4 Smoother If you're looking for a top of the line smoother, stroll on by. I'm not sure who made this plane, but it is of somewhat questionable quality. That said it does work, and if maintained it will likely continue to work. I...
Pine Knot #3 Smoothing Plane

Pine Knot #3 Smoothing Plane

Pine Knot #3 Smoothing Plane Pine Knot and Bluegrass were house brands of Belknap. Belknap started in Louisville, Kentucky in 1840 twenty years before the start of the Civil War;it was started by William Burke Belknap. They had several tiers...

Liberty Bell Examples

The Liberty Bell Main Page-->
STANLEY  #129 Liberty Bell Transitional Fore Plane

STANLEY  #129 Liberty Bell Transitional Fore Plane

STANLEY  #129 Liberty Bell Transitional Fore Plane 20"L, 2 3/8"W, 5 5/8lbs, 1877-1918. STANLEY #129 Transitional – Liberty Bell Back to History--> All My Liberty Be...
Stanley #104 Liberty Bell Smoothing Plane

Stanley #104 Liberty Bell Smoothing Plane

Stanley #104 Liberty Bell Smoothing Plane 1877-1918 Length 9" Width of cutter 2 1/8" Weight 3 1/8# Back to History-->
Stanley #105 Liberty Bell Jack Plane

Stanley #105 Liberty Bell Jack Plane

Stanley #105 Liberty Bell Jack Plane 1877-1918 Length 14"Width of cutter 2 1/8"Weight 3 7/8# Back to History--> (My # 105-030423-2)
Stanley #105 Liberty Bell Jack Plane with Undocumented Raised Tote Receiver

Stanley #105 Liberty Bell Jack Plane with Undocumented Raised Tote Receiver

Stanley #105 Liberty Bell Jack Plane with Undocumented Raised Tote Receiver. It is probably the last type. Note the side by side comparison with a typical Liberty Bell and the type with a flat receiver. Back to History--> ...
Stanley #122 TRANSITIONAL LIBERTY BELL

Stanley #122 TRANSITIONAL LIBERTY BELL

STANLEY #122 Transitional Liberty Bell This is a Liberty Bell Plane Stanley #122 Smooth plane, 8"L, 1 3/4"W, 2 3/8lbs, 1877-1917. Back to History--> (MY # 122-081017-2) (My #122-022523-1)
Stanley #122 Transitional Liberty Bell Type 1

Stanley #122 Transitional Liberty Bell Type 1

Stanley #122 Transitional Liberty Bell Type 1 Stanley #122 Smooth plane, 8"L, 1 3/4"W, 2 3/8lbs, 1877-1917.
Stanley #127 TRANSITIONAL – LIBERTY BELL

Stanley #127 TRANSITIONAL – LIBERTY BELL

Stanley #127 TRANSITIONAL – LIBERTY BELL 1877-1918 Length 15"Width of cutter 2 1/8"Weight 3 1/2# Back to History-->
Stanley #127 Transitional Jack Plane

Stanley #127 Transitional Jack Plane

Stanley #127 TRANSITIONAL – LIBERTY BELL 1877-1918 Length 15"Width of cutter 2 1/8"Weight 3 1/2# Back to History--> (My #127-020623-4)
Stanley #135 Transitional - Liberty Bell

Stanley #135 Transitional - Liberty Bell

STANLEY #135 Transitional - Liberty Bell STANLEY #135 Smooth plane, 10"L, 2 1/8"W, 3lbs, 1877-1918. I believe this plane was made between 1876-1886. Back to History--> (MY #135-081017-8) ...
Stanley Liberty Bell #105 Jack Plane

Stanley Liberty Bell #105 Jack Plane

Stanley Liberty Bell #105 Jack Plane 14" Long Weight 3# 8oz The Liberty Bell Main Page--> Liberty Bell Examples

Log In

[wppb-login]

Login

[ultimatemember form_id="35086"]

Lost Password

[bbp-lost-pass]
Marples Useful Home Carpentry

Marples Useful Home Carpentry

--------------------------- (adsbygoogle = window.adsbygoogle || []).push({});

Members

[ultimatemember form_id="35088"]
Circa 1876 Metallic Plane Co. Plow Plane

Circa 1876 Metallic Plane Co. Plow Plane

The Metallic Plan Company, made planes from 1867-1880 in Auburn, New York. According to PTAMPIA Vol 1 or Vol 2 there is not a patent associated with this plane found. Smith states it probably came with 8 cutters. I don’t have much more information o...
Metallic Plane Co. - Elliot Storke Faucet Handle Smoothing Plane

Metallic Plane Co. - Elliot Storke Faucet Handle Smoothing Plane

Metallic Plane Co. - Elliot Storke Faucet Handle Smoothing Plane Length 9" Cutter width 1 1/8" weight 3# 11ozs US Patent: 174,870 Carpenter's Plane Patent Granted: Mar. 14, 1876 Patentee: Elliot G. Storke - Auburn, NY ...
Metallic Plane Co. – Elliot Storke Faucet Handle Jack Plane

Metallic Plane Co. – Elliot Storke Faucet Handle Jack Plane

Metallic Plane Co. – Elliot Storke Faucet Handle Jack Plane US Patent: 174,870  Carpenter’s Plane Patent Granted: Mar. 14, 1876 Patentee: Elliot G. Storke – Auburn, NY Length 15" Cutter width 1 1/8" weight 4# 13ozs ...
Metallic Plane Co. #9 Block Plane

Metallic Plane Co. #9 Block Plane

Metallic Plane Co. #9 Block Plane Metallic Plane Co History--> More Metakllic Plane Co. Examples
Metallic Plane Co. 9 3/4" Smoother. No Adjustments

Metallic Plane Co. 9 3/4" Smoother. No Adjustments

Palmer & Storkes Patent Granted: Nov. 28, 1871 US Patent: 121,406 Improvement in Bench-Planes Patentees: Sidney W. Palmer  - Auburn, NY Elliot G. Storke  - Auburn, NY Note most of...
Metallic Plane Co. Jointer

Metallic Plane Co. Jointer

Metallic Plane Co. Elliot Storke Patent No. 162710 Granted: April 27, 1875 This is the first plane manufactured by the Metallic Plane Co. Length 20 1/2" Cutter width 2 3/8" Weight6# 3 ozs Metallic...
Metallic Plane Co. Nelson Palmer Patent

Metallic Plane Co. Nelson Palmer Patent

Metallic Plane Co. Nelson Palmer Patent Granted: May 14, 1867 Metallic Plane Co History--> Additional Metallic Plane Examples
Metallic Plane Co. Smoother

Metallic Plane Co. Smoother

Palmer & Storkes Patent Granted: Nov. 28, 1871Auburn NY Metallic Plane Co History--> Additional Metallic Plane Co. Examples
Millers Falls #11 Junior Jack Plane

Millers Falls #11 Junior Jack Plane

Millers Falls #11 Junior Jack Plane Millers Falls Examples (My #11-081320-1)
Craftsman Smoother by Millers Falls

Craftsman Smoother by Millers Falls

Craftsman Made by Millers Falls Smoother The knob and tote is original. They were both stained, but I repaired the horn on the tote and uncovered some gorgeous grain, so it was stripped and lacquered. The knob was lightly sanded and lacquered with...
Dunlap #4 Smoother by Millers Falls

Dunlap #4 Smoother by Millers Falls

Dunlap #4 Smoother by Millers Falls The blade seems to be of decent quality and once tuned, it's a nice working plane. We see the typical Millers Falls overspray and the frog seats were painted. A little sandpaper took care of that. With...
Millers Falls #07 Skewed Rebate Plane

Millers Falls #07 Skewed Rebate Plane

Millers Falls #07 Skewed Rabbet Plane Like a Stanley #140, the Millers Falls #07 has a skewed cutter and a removable side plate. With the plate removed the block plane turns into a rebate plane. The skewed cutter works well on all types of woods and...
Millers Falls #10 Smoothing Plane

Millers Falls #10 Smoothing Plane

Millers Falls #10 Smoothing Plane This Millers Falls #10 was featured in this restoration series https://www.timetestedtools.net/2016/01/26/bench-plane-restoration-guide-part-1/ Additional Millers...
Millers Falls #11 Junior Jack

Millers Falls #11 Junior Jack

Millers Falls #11 Junior Jack is the same size as a Stanley #5 1/4.
Millers Falls #14 Jack

Millers Falls #14 Jack

Millers Falls #14 Jack All finishes on metal are original. Some typical chips and scratches but overall in decent shape. The knob and tote are original. They have been lightly sanded and a new coat of lacquer. What I believe is a type 4 A slight camber...
Millers Falls #14 Jack Plane

Millers Falls #14 Jack Plane

Millers Falls #14 Jack Plane As Found After Cleanup and repair Additional Millers Falls Examples (My #6-2012)
Millers Falls #16 Block Plane

Millers Falls #16 Block Plane

Millers Falls #16 Plane
Millers Falls #18 Fore Plane

Millers Falls #18 Fore Plane

Millers Falls #18 Fore Plane Millers Falls Examples (My#14b 4-2013) -
MILLERS FALLS #18C Fore (type-1)

MILLERS FALLS #18C Fore (type-1)

MILLERS FALLS #18C Fore (type-1) This is the same size as a Stanley #6. Millers Falls Examples
Millers Falls #1950 Bit Brace (Hand Drill)

Millers Falls #1950 Bit Brace (Hand Drill)

Millers Falls #1950 Bit Brace (Hand Drill) Additional Millers Falls Examples
Millers Falls #22 Jointer Plane

Millers Falls #22 Jointer Plane

Millers Falls #22 Jointer Plane Thanks to Rob Morgan for sending this in Additional Millers Falls Examples
Millers Falls #37 KNUCKLE BLOCK

Millers Falls #37 KNUCKLE BLOCK

Millers Falls #37 KNUCKLE BLOCK  
MILLERS FALLS #56 Block  like a Stanley 60 1/2

MILLERS FALLS #56 Block like a Stanley 60 1/2

MILLERS FALLS #56 Block  like a Stanley 60 1/2 I      // Additional Millers Falls Examples
Millers Falls #7 Smoother

Millers Falls #7 Smoother

Millers Falls #7 Smoother All finishes on metal are original The knob and tote are original. What I believe is a type 2 but without brass tote and knob nuts. As found other than a light cleaning.
Millers Falls #85 Rabbet and Fillester Plane

Millers Falls #85 Rabbet and Fillester Plane

Millers Falls #85 Rabbet and Fillester Plane  (Exactly like the Stanley 78) Equipped with two cutter seats—rear seat with a lever adjustment for cutter depth and forward seat for bull nose work. Adjustable fence on steel arm can be used on either si...
Millers Falls #9 Smoothing Plane

Millers Falls #9 Smoothing Plane

Millers Falls #9 Smoothing Plane Additional Millers Falls Examples (My #9-012718-2)
Millers Falls #9 Smoothing Plane

Millers Falls #9 Smoothing Plane

Millers Falls #9 Smoothing Plane Additional Millers Falls Examples
Millers Falls #9 Smoothing Plane

Millers Falls #9 Smoothing Plane

Millers Falls #9 Smoothing Plane --------- Millers Falls Examples (My #9-123015-1)
Millers Falls #900 Smoother

Millers Falls #900 Smoother

Millers Falls #900 Smoother Additional Millers Falls Examples
MILLERS FALLS #900 SMOOTHER

MILLERS FALLS #900 SMOOTHER

Millers falls #900 SMOOTHER_ This took a lot of work. The sole was out of flat quite a bit more than average. Note the sole still has a dish in the back part but the requires spots are coplanar and it’s ready for smoothing. The blade seems t...
Millers Falls #900 Smoother

Millers Falls #900 Smoother

Millers Falls #900 Smoother Additional Millers Falls Examples (My #900b-020918-3)
Millers Falls #900 Smoothing Plane

Millers Falls #900 Smoothing Plane

Millers Falls #900 Smoothing Plane Additional Millers Falls Examples (My #900-020918-4)
Millers Falls #9C Smoothing Plane

Millers Falls #9C Smoothing Plane

Millers Falls #9C Smoothing Plane - Millers Falls Examples (My #9C -062122-2)
Millers Falls Block Plane

Millers Falls Block Plane

A nice heavy small block plane. These are known as unadjustable, simply because the adjustment is manual. This plane is completely as found other than a very light cleaning. I don't believe it's ever been sharpened.
Millers Falls Made Fulton #3708  (#2 size)  Smoother

Millers Falls Made Fulton #3708 (#2 size) Smoother

Millers Falls Made Fulton #3708 (#2 size) Smoother
Craftsman #619-37421 with 4way blade

Craftsman #619-37421 with 4way blade

Craftsman #619-37421 with 4way Patented blade A Gallery of Sargent Hand Planes (My #619-37421)
Goodell Pratt Egg Beater Drill

Goodell Pratt Egg Beater Drill

Goodell Pratt Egg Beater Drill
Marsh Picture frame Miter box

Marsh Picture frame Miter box

a Marsh Picture frame Miter box.        
Sargent Made Craftsman 3470BL Smoothing Plane

Sargent Made Craftsman 3470BL Smoothing Plane

Sargent Made Craftsman 3470BL Smoothing Plane A Gallery of Sargent Hand PlanesShows in (Page)--- Sargent (My #3470-031523-2)

Small Vintage Nail Puller

Small Vintage Nail Puller Overall length is 7 1/8"
Stanley #42 SAW SET

Stanley #42 SAW SET

STANLEY #42 SAW SET
Stanley #42X SAW SET In Original Box

Stanley #42X SAW SET In Original Box

In original box but as you can see, the box itself has seen better days
Stanley #813 12 inch Bit Brace

Stanley #813 12 inch Bit Brace

Stanley #813 12 inch Bit Brace Lightly cleaned (see photos) Everything is in working order. Ratchets work smooth. Lightly oiled. (MY #S-813-12in)

My Hand Saw Collectors Notes

The Die Stamp was used pre 1860 when makers started etching Split nuts are typically 1875 and before. __________________________________________________________________ Some somewhat sought after saws Disston D-20 The Rip version is scarcer...
Oakleaf #4 Smoothing Plane

Oakleaf #4 Smoothing Plane

Oak Leaf  was a sub brand of The Simmons Hardware Company which became Shapleigh Hardware Co. Moe Oak Leaf Examples
Ohio Tool #015 transitional Jack Plane

Ohio Tool #015 transitional Jack Plane

Ohio Tool #015 transitional Jack Plane Additional Ohio Tools Examples (My #015-031923-2)
Ohio Tools #04 Smoother

Ohio Tools #04 Smoother

More on the Ohio Tools —> The Ohio Tools Work Book—> A beautiful maroon japanned Ohio Tools #04 smoother. The japanning is original. The gorgeous rosewood has been refinished. The plane has been sharpened and tested. ...
Ohio Tools #04 Smoother

Ohio Tools #04 Smoother

Ohio Tools #04 Smoother See my sharpening notes for Ohio Tools like this one --->. A nice example of an early Ohio Tools #o4C smoother. It has been cleaned and sharpened. Ready for you right out of the box. Note this plane has a very fine mouth...
Ohio Tools #04C Smoother

Ohio Tools #04C Smoother

Ohio Tools #04C Smoother See my sharpening notes for Ohio Tools like this one --->. A nice example of an early Ohio Tools #o4C smoother. It has been cleaned and sharpened. Ready for you right out of the box. ...
Ohio Tools #05 Jack Plane

Ohio Tools #05 Jack Plane

Ohio Tools #05 Jack Plane made for woodworking. There is not much collector value left, but as a woodworking tool, this plane can shine. Priced to get into your hands, and ready to use right out of the box. It's sharpened with a camber for rough work._x000D_\n_x000D_\nIt...
Ohio Tools #05 Jack Plane

Ohio Tools #05 Jack Plane

More on the Ohio Tools —> _ The Ohio Tools Work Book—> There is not a whole lot to tell beyond the pictures. Obvious front knob replacement screw and repaired tote. A very nice Jack plane for the woodworking shop. Sharpened for smoothing or ...
Ohio Tools #06 Fore Plane

Ohio Tools #06 Fore Plane

Ohio Tools #06 Fore Plane With a replacement Hock High Carbon Tool Steel (O1) Blade and Chip breaker (Hock #BBS238) Original Iron and chip breaker are shown The Hock blade is as it came out of the package. The plane has been restored and...
Ohio Tools #07 Marks Patent Jointer

Ohio Tools #07 Marks Patent Jointer

Ohio Tools #07 Marks Patent Jointer More information on this Ohio Tools Plane It doesn't matter if you're an Ohio Tools collector or just looking for a jointer that may a bit of a conversational piece, this fits either. The plane has been stripped...
Ohio Tools #08 Jointer

Ohio Tools #08 Jointer

Ohio Tools #08 Jointer More on the Ohio Tools —> The Ohio Tools Work Book—> It's been dismantled, cleaned, sharpened and tested. Nothing more, nothing less. Pictures should tell the story. Some beautiful rosewood. Original japanning in acc...
Ohio Tools Marks Patent #04 Smoother

Ohio Tools Marks Patent #04 Smoother

Ohio Tools Marks Patent #04 Smoother Click here for some more Ohio Tools History This plane is stamped with the Edward Marks’ 8-20-07 Patent frog patent date. It has the frog seat from the patent, but an adjustment screw has been added to it. The a...
Ohio Tools Marks Patent Smoother

Ohio Tools Marks Patent Smoother

O hio Tools Marks Patent Smoother with Consolidated Tool Works Iron. This blade is Probably not original to the plane. More on the Marks Patent ---> This plane has been sharpened (note some minor pitting on the iron so the ruler trick was employed)...

ORDER TRACKING FORM

[woocommerce_order_tracking]

Password Reset

[ultimatemember_password]

privacy

privacy

Read It Here

***Hand Saw Related Reading *** TEXT BOOK OF ATKINS SILVER STEEL SAWS 1927 How a Disston Hand Saw Is Made 1922 Woodrough and McParlin - Ohio Saw Works - 1874 How-To Do-It Book for Home Workshops 1932 - by E.C. Atkins & Co. ***Hand...

Register

[bbp-register]

Register

[ultimatemember form_id="35085"]

Register

[wppb-register]
Blue Grass Smoother (#1408 by Sargent)

Blue Grass Smoother (#1408 by Sargent)

Pine Knot and Bluegrass were house brands of Belknap. Belknap started in Louisville, Kentucky in 1840 twenty years before the start of the Civil War;it was started by William Burke Belknap. They had several tiers of tools the first one is the highly...
Craftsman Smoother by Sargent

Craftsman Smoother by Sargent

Sargent made CRAFTSMAN SMOOTHER The knob and tote is original and have been refinished The japanning has been stripped and the plane repainted with engine enamel. This plane was completely tuned, sharpened and tested The cap, chip breaker, and blade...
Sargent #10C Smoother

Sargent #10C Smoother

Sargent #10 Smoother This plane is the actual plane featured in  “THE SARGENT HAND PLANE REFERENCE GUIDE FOR COLLECTORS & WOODWORKERS – SECOND EDITION ” also available on amazon .
Sargent #14 Shaw Patent Jack Plane

Sargent #14 Shaw Patent Jack Plane

Sargent #14 Shaw Patent Jack Plane A Gallery of Sargent Hand Planes
Sargent #1414 Jack Plane

Sargent #1414 Jack Plane

Sargent #114 Jack Plane This is a last production" model of this Sargent plane This later model has plastic knob and tote, but it's not a flimsy plastic like some of the cheaper models. You can also see that although Sargent followed most other...
Sargent #160 Scrub Plane

Sargent #160 Scrub Plane

Sargent #160 Scrub Plane On Page #163 --> https://www.timetestedtools.net/books-3/the-sargent-hand-plane-reference-guide-for-collectors-woodworkers/ A Gallery of Sargent Hand Planes (My #106-031523-1)...
Sargent #30 Rabbet Plane VBM

Sargent #30 Rabbet Plane VBM

Sargent #30 Rabbet Plane VBM Sargent Carriage Makers’ Rabbet Plane Manufactured: From 1910 to 1943Sargent V.B.M Adjustable Iron PlanesPatented February 3, 1891.Polished Trimmings.East India Mahogany Handle and Knob.With Patent Side Adjustment f...
Sargent #407 Brass Badged (Oval Badge)

Sargent #407 Brass Badged (Oval Badge)

Sargent #407 Brass Badged (Oval Badge) This plane is featured on page 75 of "The Sargent Hand Plane Reference Guide for Collectors & Woodworkers – Second Edition" https://www.timetestedtools.net/books-3/the-sargent-hand-plane-reference-guide-for-collectors-woodworkers/ ...
Sargent #407 Brass Badged (Square Badge)

Sargent #407 Brass Badged (Square Badge)

Sargent #407 Brass Badged (Square Badge) This plane is the plane on the cover of The Sargent Hand Plane Reference Guide for Collectors & Woodworkers – Second Edition https://www.timetestedtools.net/books-3/the-sargent-hand-plane-reference-guide-for-collectors-woodworkers/ ...
Sargent #407 Smoothing Plane - Type 5 with Japanned Lever Cap

Sargent #407 Smoothing Plane - Type 5 with Japanned Lever Cap

Sargent #407 Smoothing Plane - Type 5 with Japanned Lever Cap A Gallery of Sargent Hand Planes (My #407-121017-2)
Sargent #407 Type 2 Smoothing Plane

Sargent #407 Type 2 Smoothing Plane

Sargent #407 Type 2 Smoothing Plane A Gallery of Sargent Hand Planes (My #407-031723-3)
Sargent #407 Type 3 Smoothing Plane

Sargent #407 Type 3 Smoothing Plane

Sargent #407 Type 3 Smoothing Plane A Gallery of Sargent Hand Planes (My #407-031723-4)
Sargent #407 Type 4 Smoothing Plane (Repaired Frog)

Sargent #407 Type 4 Smoothing Plane (Repaired Frog)

Sargent #407 Type 4 Smoothing Plane (Repaired Frog) A Gallery of Sargent Hand Planes (My #407-121017-1)
Sargent #407 Type 4 VBM Smoothing Plane

Sargent #407 Type 4 VBM Smoothing Plane

Sargent #407 Type 4 VBM Smoothing Plane A Gallery of Sargent Hand Planes (My #407-031723-5)
Sargent #407 Type 5 Smoothing Plane

Sargent #407 Type 5 Smoothing Plane

Sargent #407 Type 5 Smoothing Plane (My #407-031723-7)
Sargent #407 Type 5 Smoothing Plane

Sargent #407 Type 5 Smoothing Plane

Sargent #407 Type 5 Smoothing Plane A Gallery of Sargent Hand Planes (My #407-031723-8)
Sargent #407 VBM Smoothing Plane with Custom Zebrawood

Sargent #407 VBM Smoothing Plane with Custom Zebrawood

Sargent #407 VBM Smoothing Plane with Custom Zebrawood A Gallery of Sargent Hand Planes
Sargent #408 Brass Badged (Oval Badge)

Sargent #408 Brass Badged (Oval Badge)

Sargent #408 Brass Badged (Oval Badge) https://www.timetestedtools.net/books-3/the-sargent-hand-plane-reference-guide-for-collectors-woodworkers/ A Gallery of Sargent Hand Planes (My #408-031823-6)...
Sargent #408 Brass Badged (Oval Badge)

Sargent #408 Brass Badged (Oval Badge)

Sargent #408 Brass Badged (Oval Badge) https://www.timetestedtools.net/books-3/the-sargent-hand-plane-reference-guide-for-collectors-woodworkers/ A Gallery of Sargent Hand Planes (My #408-031823-7)...
Sargent #408 Type 2 Smoothing Plane

Sargent #408 Type 2 Smoothing Plane

Sargent #408 Type 2 Smoothing Plane The type 2 is known as the horseshoe lateral made about 1891-1901
Sargent #408 Type 2-3 Smoothing Plane

Sargent #408 Type 2-3 Smoothing Plane

Sargent #408 Type 2-3 Smoothing Plane This plane has a type 2 base with a type 3 Lateral It's on page 80 of The Sargent Hand Plane Reference Guide for Collectors & Woodworkers - Second Edition https://www.timetestedtools.net/books-3/the-sargent-hand-plane-reference-guide-for-collectors-woodworkers/ ...
Sargent #408 Type 4b Smoothing Plane

Sargent #408 Type 4b Smoothing Plane

Sargent #408 Type 4b Smoothing Plane https://www.timetestedtools.net/sargent-400-series-bench-plane-type-study/ A Gallery of Sargent Hand Planes (My #408-031123-4)
Sargent #408 Type 5 Smoother

Sargent #408 Type 5 Smoother

Sargent #408 Type 5 This is a type 5 Sargent #408. The #408 is 9” ling and has a 1 3/4” cutter It weight is 2# 15.6 ozs This one has a Stanley cutter The knob and tote is Mahogany. It has a right handed cutter adjuster As with all...
Sargent #408 Type 5 Smoothing Plane

Sargent #408 Type 5 Smoothing Plane

Sargent #408 Type 5 Smoothing Plane (#3 Size smoother) Sargent #400 Series Bench Plane Type Study A Gallery of Sargent Hand Planes (My #408-030723-1)
Sargent #408 Type 6 Smooth Plane

Sargent #408 Type 6 Smooth Plane

Sargent #408 Type 6 Smooth Plane (My# #408-03128-6) This plane has been tuned, sharpened and tested. The pot marks you see in the cap are casting blemishes. The knob and tote are original. They were lightly sanded and give a few coats of fresh...
Sargent #409 Brass Badged (Oval Badge)

Sargent #409 Brass Badged (Oval Badge)

Sargent #409 Brass Badged (Oval Badge) https://www.timetestedtools.net/books-3/the-sargent-hand-plane-reference-guide-for-collectors-woodworkers/ A Gallery of Sargent Hand Planes (My #409-031823-9)...
Sargent #409 Smoother

Sargent #409 Smoother

Here you get to use a plane rich in history along with its part in documenting it's history. This plane is also the actual plane featured in "THE SARGENT HAND PLANE REFERENCE GUIDE FOR COLLECTORS & WOODWORKERS – SECOND EDITION " also available o...
Sargent #409 Smoother Type 5

Sargent #409 Smoother Type 5

Sargent #409 Smoother Type 5 The plane has been sand blasted and completely restored. The knob and tote are the original Mahogany. The tote has been repaired. It has a Victory blade which would be a replacement. It’s definitely a work horse and p...
Sargent #409 Smoother Type 6

Sargent #409 Smoother Type 6

SARGENT Type 6 #409 Smoother Size is similar to a Stanley #4 This is a type 6 #409 Original Japanning. Knob and tote are original. They have been refinished. A Gallery of Sargent Hand Planes
Sargent #409 Smoother VBM Type 4a

Sargent #409 Smoother VBM Type 4a

Sargent #409 Smoother Type 4a This Sargent #409 smoother has a unique characteristic i have not seen before. Note the guides machined in the sides of the frog and seat. This is the only one like this I've seen(although I have seen another frog like...
Sargent #409 Type 0

Sargent #409 Type 0

Sargent #409 Type 0 Type 0 Sargent #400 series…...(1887 – first run) (Dates estimated) This version of Sargent bench plane is one of the rarest hand planes you’ll need to find as a Sargent Collector. Other than this one, I’ve not seen another for sal...
Sargent #409 Type 2 restored with hock blade and chipbreaker set 

Sargent #409 Type 2 restored with hock blade and chipbreaker set 

A Gallery of Sargent Hand Planes (My #409-030423-1)
Sargent #409 Type 2 Smoother with Hock Upgrade

Sargent #409 Type 2 Smoother with Hock Upgrade

SARGENT #409 Type 2 Smoother with Hock Upgrade It came to me without a blade or chip breaker, so what a perfect opportunity to add a High Carbon Steel (O1) Blade and Cap Iron Set. The Hock set is brand new and works right out of the package....
Sargent #409 Type 2-3 Smoothing Plane

Sargent #409 Type 2-3 Smoothing Plane

Sargent #409 Type 2-3 Smoothing Plane Sargent #408 Type 2-3 Smoothing Plane This plane has a type 2 base with a type 3 Lateral A Gallery of Sargent Hand Planes (My #409-031123-3)
Sargent #409 Type 4 Custom Smoother

Sargent #409 Type 4 Custom Smoother

Sargent #409 Type 4 Custom Smoother This plane has been customized. The body was sand blasted and given several coats of industrial clear lacquer. The knob and tote are new custom made from Bloodwood. Not the tote has been left a little oversized...
Sargent #409 Type 4 VBM Smoothing Plane

Sargent #409 Type 4 VBM Smoothing Plane

Sargent #409 Type 4 VBM Smoothing Plane A Gallery of Sargent Hand Planes (My #409-031623-4)
Sargent #409 Type 5 Smoothing Plane

Sargent #409 Type 5 Smoothing Plane

Sargent #409 Type 5 Smoothing Plane A Gallery of Sargent Hand Planes (My #409-031623-2)
Sargent #409 Type 5 Smoothing Plane

Sargent #409 Type 5 Smoothing Plane

Sargent #409 Type 5 Smoothing Plane A Gallery of Sargent Hand Planes (My #409-031623-3)
Sargent #409 VBM Japanned cap Smoother

Sargent #409 VBM Japanned cap Smoother

Sargent #409 VBM smoother with a Japanned cap A Gallery of Sargent Hand Planes Sargent made a series of planes in the type 4 - 5 era with Japanned caps. It is unknown at this time if these short runs where special orders, or simply Sargent...
Sargent #409 VBM Smoothing Plane

Sargent #409 VBM Smoothing Plane

Sargent #409 VBM Smoothing Plane (Type 4b) A Gallery of Sargent Hand Planes (My #409-031623-1)
Sargent #409C type 5 Smoother

Sargent #409C type 5 Smoother

Sargent #409C type 5 Smoother A Gallery of Sargent Hand Planes  (My #409C-100422-1)
Sargent #410 Brass Badged (Square Badge)

Sargent #410 Brass Badged (Square Badge)

Sargent #410 Brass Badged (Square Badge) This plane is featured in "The Sargent Hand Plane Reference Guide for Collectors & Woodworkers – Second Edition" https://www.timetestedtools.net/books-3/the-sargent-hand-plane-reference-guide-for-collectors-woodworkers/ ...
Sargent #410 Type 2 Smoother

Sargent #410 Type 2 Smoother

Sargent #410 Type 2 Smoother This plane is also the actual plane featured in  “THE SARGENT HAND PLANE REFERENCE GUIDE FOR COLLECTORS & WOODWORKERS – SECOND EDITION ” also available on amazon . It’s the #410 shown on the bottom of page 82 Stric...
Sargent #411 Jack Plane

Sargent #411 Jack Plane

Sargent #411 Jack Plane
Sargent #411 type 5 Junior Jack Plane

Sargent #411 type 5 Junior Jack Plane

Sargent #411 type 5 Junior Jack Plane More on the junior jack story is here--> (My# 411-020523-1)
Sargent #414 Brass Badged (Oval Badge)

Sargent #414 Brass Badged (Oval Badge)

Sargent #414 Brass Badged (Oval Badge) A Gallery of Sargent Hand Planes (My #414-031823-4)
Sargent #414 Jack Plane

Sargent #414 Jack Plane

SARGENT #414 Jack Plane Size is similar to a Stanley #5 This is a type 6 #414 Completely restored and Tuned. Ready to work. Knob and tote are original. They have been refinished. No breaks or cracks (adsbygoogle = window.adsbygoogle ||...
Sargent #414 Jack Plane Restored Type 2

Sargent #414 Jack Plane Restored Type 2

Sargent #414 Jack Plane Restored Type 2 https://www.timetestedtools.net/sargent-400-series-bench-plane-type-study/ A Gallery of Sargent Hand Planes (My #414-031123-5)
Sargent #414 Jack Plane Restored Type 3

Sargent #414 Jack Plane Restored Type 3

Sargent #414 Jack Plane Restored Type 3 https://www.timetestedtools.net/sargent-400-series-bench-plane-type-study/ A Gallery of Sargent Hand Planes (My #414-031123-6)
Sargent #414 Jack Type 2

Sargent #414 Jack Type 2

Sargent #414 Jack Type 2 _ An Example that was Completely restored. Sharpened with a slight camber. New rosewood knob and tote.
Sargent #414 Jack with  guides machined in the sides

Sargent #414 Jack with guides machined in the sides

Sargent #414  Jack Plane New rosewood tote. Knob is original with no cracks or breaks The pictures tell most of the story. It is sharpened with a camber as a Jack was typically used. The plane has been completely stripped and restored. This would ...
Sargent #414 Type 2 Jack Plane

Sargent #414 Type 2 Jack Plane

Sargent #414 Type 2 Jack Plane Here is the type study--> (My# 414-011523-4)
Sargent #414 VBM Jack

Sargent #414 VBM Jack

Sargent #414 VBM Jack_ New rosewood tote. Also note the knob had a tight crack. I opened the crack as much as i could (I usually try to break it for a complete repair, but this would not break with reasonable pressure) so I forced some CA glue in and...
Sargent #414C Jack Type 4 VBM

Sargent #414C Jack Type 4 VBM

Sargent #414C Jack Type 4 VBM The japanning is about 60%. The blade has been sharpened with a camber and is ready to work as a Jack. The tote is a user made tote that was reasonably well done. I’ve done some additional sanding and refinished The k...
Sargent #415 Fore Plane

Sargent #415 Fore Plane

Sargent #415 Fore Plane A Gallery of Sargent Hand Planes (My #415-031523-6)
Sargent #415 Fore Plane Type 4a

Sargent #415 Fore Plane Type 4a

Sargent #415 Fore Plane Type 4a Note the cap is marked with a "416" This plane is featured in "The Sargent Hand Plane Reference Guide for Collectors & Woodworkers - Second Edition A Gallery of Sargent Hand...
Sargent #418 type 2 Fore Plane

Sargent #418 type 2 Fore Plane

Sargent #418 type 2 Fore Plane Length: 18 inchesCutter Width: 2⅜ inches A Gallery of Sargent Hand Planes (My #418-031123-11)
Sargent #418 Type 5 Fore Plane

Sargent #418 Type 5 Fore Plane

Sargent #418 Type 5 Fore Plane Length: 18 inchesCutter Width: 2⅜ inches A Gallery of Sargent Hand Planes (My #418-031323-3)
Sargent #418 VBM Fore Plane with Hock Blade

Sargent #418 VBM Fore Plane with Hock Blade

Sargent #418 VBM Fore Plane with Hock Blade Custom made wenge knob and tote Brand new 2 3/8" Hock Blade and chip breaker set.
Sargent #422 Jointer Type 2

Sargent #422 Jointer Type 2

Sargent #422 Jointer Type 1/2 This has some very early components. It is potentially a very late type 1 or early type 2 making it close to 1891. It's original. Japanning is about 60% Rosewood is as I found it. No cracks or breaks Blade has some minor...
Sargent #422 Jointer Type 4

Sargent #422 Jointer Type 4

Sargent #422 Jointer Type 4 Size is similar to a Stanley #7 This is a type 4 right at the beginning of the VBM Original Japanning. Knob and tote are original. They have been refinished. Note the tote has been repaired A Gallery of Sargent...
Sargent #422.Type 2 Jointer

Sargent #422.Type 2 Jointer

Sargent #422.Type 2. Jointer. See the Sargent type study here As Found condition (see photos) This is the same size as a Stanley #7.  Japanning is reasonable. A great collector piece or user (my #-422-082117-1)
Sargent #424 Type 2 Jointer

Sargent #424 Type 2 Jointer

Sargent #424 Type 2 Jointer A Gallery of Sargent Hand Planes (My #409-031623-5)
Sargent #52 Scraper

Sargent #52 Scraper

Sargent #52 Scraper This plane is also the actual plane featured in "THE SARGENT HAND PLANE REFERENCE GUIDE FOR COLLECTORS & WOODWORKERS – SECOND EDITION " also available on amazon . It's the plane shown on page 144 .
Sargent #5408 Smoothing Plane

Sargent #5408 Smoothing Plane

Sargent #5408 Smoothing Plane A Gallery of Sargent Hand Planes (My #408-031023-1)
Sargent #5409 Type 3 Smoothing Plane

Sargent #5409 Type 3 Smoothing Plane

Sargent #5409 Type 3 Smoothing Plane (My# 5409-012423-2)
Sargent #5409 Type 3 Smoothing Plane

Sargent #5409 Type 3 Smoothing Plane

Sargent #5409 Type 3 Smoothing Plane https://www.timetestedtools.net/2016/01/27/typing-sargent-bench-planes-400-series-type-5400-series/ A Gallery of Sargent Hand Planes (My #5409-031523-10)
Sargent #5410 Type 3 Corrugated Smother

Sargent #5410 Type 3 Corrugated Smother

Sargent #5410 Type 3 Corrugated Smother The Sargent #5410 (or #410C) was the same size as a Stanley #4 1/2. The #5400 series of planes are type 2 and 3 corrugated versions of #400 planes manufactured before 1910 when the VBM series was introduced....
Sargent #5414 Type 2 Jack Plane

Sargent #5414 Type 2 Jack Plane

Sargent #5414 Type 2 Jack Plane  (The #5414 was an early #414 corrugated) Note the welded tote bolt. The sole was stripped so this was the repair The tote has been repaired. ...
Sargent #5418 Corrugated Fore Plane Type 3

Sargent #5418 Corrugated Fore Plane Type 3

Sargent #5418 Corrugated Fore Plane Type 3 https://www.timetestedtools.net/2016/01/27/typing-sargent-bench-planes-400-series-type-5400-series/ A Gallery of Sargent Hand Planes (My...
Sargent #5418 Fore Plane

Sargent #5418 Fore Plane

Sargent #5418 Fore Plane https://www.timetestedtools.net/2016/01/27/typing-sargent-bench-planes-400-series-type-5400-series/ (My #5418-031423-1)
Sargent #5424 ( 424C ) Type 2/3 Jointer

Sargent #5424 ( 424C ) Type 2/3 Jointer

A Sargent Type 2/3 #5424 ( 424C ) (Stanley #8 Size) See the 5400 series info here —> The picture should tell the whole story. The 5424 is a bit uncommon and kind of hard to find. The base has been stripped and refinished. For a S...
Sargent #5424 (424C) Jointer

Sargent #5424 (424C) Jointer

A Sargent Type 2 #5424 (Stanley #8 Size) See the 5400 series info here ---> The picture should tell the whole story. The 5424 is a bit uncommon and kind of hard to find.
Sargent #59 Scraper Plane

Sargent #59 Scraper Plane

Sargent #59 Scraper Plane From Rob Morgan's Archives The Sargent Gallery
Sargent #6408 Shaw Patent Prototype

Sargent #6408 Shaw Patent Prototype

Sargent #6408 Shaw Patent Prototype The #6408 Sargent is one of the rarest hand planes you'll need to find as a Sargent Collector. Other than this one, I've not seen another for sale, and I know of only 3 in private collections. This plane is in this...
Sargent #7 Smoother

Sargent #7 Smoother

Sargent #7 Smoother This plane is also the actual plane featured in  “THE SARGENT HAND PLANE REFERENCE GUIDE FOR COLLECTORS & WOODWORKERS – SECOND EDITION ” also available on amazon .
Sargent #708

Sargent #708

This plane is also the actual plane featured in "THE SARGENT HAND PLANE REFERENCE GUIDE FOR COLLECTORS & WOODWORKERS – SECOND EDITION " also available on amazon . It's the plane shown on page 17  
Sargent #708 Type 3 Smoother

Sargent #708 Type 3 Smoother

Sargent #708 Type 3 Smoother (My #708-022618-1) This is the actual plane found on page 16 of “The Sargent Hand Plane Reference Guide for Collectors and Woodworkers” Don't have the book yet? Add a copy with this plane for $45 Tuned and sharpened. It has...
Sargent #710 VBM with Custom Bloodwood Knob & Tote

Sargent #710 VBM with Custom Bloodwood Knob & Tote

Sargent #710 VBM with Custom Boodwood Knob & Tote This plane is features on page 18 of The Sargent Hand Plane Reference Guide for Collectors and Woodworkers - Second Edition
Sargent #710C Autoset Smoothing Plane

Sargent #710C Autoset Smoothing Plane

Sargent #710C Autoset Smoothing Plane (My 710-021923-1)
Sargent #711 Type 5 Jack Plane

Sargent #711 Type 5 Jack Plane

Sargent #711 Type 5 Jack Plane This is the plane I featured in The Sargent Hand Plane Reference Guide for Collectors and Woodworkers Second Edition (My#711-012423-1)
Sargent #711 with Block Plane Style Knob

Sargent #711 with Block Plane Style Knob

Sargent #711 with Block Plane Style Knob. This plane is in "The Sargent Hand Plane Reference Guide for Collectors & Woodworkers – Second Edition" The Sargent #711 with Block Plane Style Knob is harder to find than the normal knob. This makes i...
Sargent #714 Autoset Jack Plane

Sargent #714 Autoset Jack Plane

Sargent #714 Autoset Jack Plane I believe This is a type 4. The Sargent Gallery..................................................Sargent Hand Plane Examples (My #714-021923-2)
Sargent #722C Autoset Jointer

Sargent #722C Autoset Jointer

Sargent #722 Autoset Jointer The Sargent Gallery…………………………………………..Sargent Hand Plane Examples (My #722-021923-4)
Sargent #722C VBM Autoset Jointer

Sargent #722C VBM Autoset Jointer

Sargent #722C VBM Autoset Jointer The Sargent Gallery…………………………………………..Sargent Hand Plane Examples (My #722-022423-3)
Sargent #79 Filletster & Rabbet Plane (New in Original Box)

Sargent #79 Filletster & Rabbet Plane (New in Original Box)

Sargent #79 Filletster & Rabbet Plane (New in Original Box) This is never used And in the original box The Sargent catalog States:Sargent V.B.M Adjustable Iron PlanesRabbet and Filletster PlanesWith Depth Gauge and Spur andRemovable Arm...
Sargent #9 Shaw Patent Smoother

Sargent #9 Shaw Patent Smoother

Sargent Shaw Patent Plane information ---> Sargent #9 Shaw Patent Smoother This plane has been completely restored. It has new wenge knob and tote and a Hock High Carbon Tool Steel (O1) Blade.
Sargent #9 Shaw Patent Smoothing Plane

Sargent #9 Shaw Patent Smoothing Plane

Sargent #9 Shaw Patent Smoothing Plane Wenge custom made Knob and Tote A Gallery of Sargent Hand Planes
Sargent Made American Beauty

Sargent Made American Beauty

I’ve got a very strict rule about computers. After the 2nd cocktail, I don’t return work emails and I don’t buy on ebay. But, who follows rules after the 2nd cocktail? Apparently not me. The work rule is easy. Who wants to work once the fun start...
Sargent made Fulton #3408 (#2 or 407 size)

Sargent made Fulton #3408 (#2 or 407 size)

Sargent made Fulton #3408 (#2or407 size) A Gallery of Sargent Hand Planes (My #3408-031723-1)
Sargent made Fulton Jack Plane #414 

Sargent made Fulton Jack Plane #414 

Sargent made Fulton Jack Plane #414  A Gallery of Sargent Hand Planes
Sargent #400 Series Bench Plane Type Study

Sargent #400 Series Bench Plane Type Study

This is an excerpt from the book, "Sargent #400 Series Bench Plane Identifcation Guide" , By Don Wilwol, Casey Benton and Mike Howell and also included in "The Sargent Hand Plane Reference Guide for Collectors and Woodworkers "    The Sargent...
.Sargent Little Shaver

.Sargent Little Shaver

<–Back to Sargent Block Planes Sargent Little Shaver 1958-1961 Sargent Little Shaver ox
Possible Sargent #104

Possible Sargent #104

This is from Tom Straders Collection. Tom believes it was made by Sargent. although it is almost identical there was no proof that Sargent made one with raised Made In USA. Sargent is the only one I know that used this style raised numbers or names....
Sargent #104 Block Plane

Sargent #104 Block Plane

<--Back to Sargent Block Planes Sargent #104 1887-1944 Catalog cut from 1888 Catalog cut from 1901 Catalog Cut from 1925
Sargent #105 Squire tail Block Plane

Sargent #105 Squire tail Block Plane

<--Back to Sargent Block Planes
Sargent #107 Block Plane

Sargent #107 Block Plane

<–Back to Sargent Block Planes Sargent #107 Type 1 The Sargent #107 will have the cap with the lever under the cap similar to the Sargent #106 #107 cut from the 1887 insert Sargent #107 Type 2 Note the version w...
Sargent #1217 Block Plane

Sargent #1217 Block Plane

Sargent #1217 Block Plane...............................From Keith Adams Collection Sargent No. 1217 Block Plane Sargent Adjustable Iron Block Planes – With Handle. No. 1217 , Block, 7 Inches, 1½ Inch Cutter More Sa...
Sargent #1306 Block Plane

Sargent #1306 Block Plane

from the collection of Keith Adams from http://www.sargent-planes.com/sargent-1306-block-plane/, Manufactured: From 1887 to 1941. Type 1 planes had a thin body casting and a turn-wheel to secure the lever cap (1887 to 1909). Patented March 21,...
Sargent #1317 Block Plane

Sargent #1317 Block Plane

Sargent #1317 Block Plane ............................................ From Keith Adams collection Patented March 21, 1893, July 6, 1897 and April 24, 1906. Iron Block Planes with Handle. Screw Adjustable and Adjustable Mouth....
Sargent #206 Apron Plane

Sargent #206 Apron Plane

<--Back to Sargent Block Planes Cut from Sargent 1887 catalog insert Catalog cut from 1888 Sargent Catalog Catalog cut from 1901 catalog Catalog cut from 1922 catalog Catalog cut from 1928 catalog Sargent @206 Type...
Sargent #206 BLOCK PLANE

Sargent #206 BLOCK PLANE

Sargent #206 BLOCK PLANE In my opinion, the Sargent #206 is the best vintage apron plane ever made. This one is fully restored, sharpened and ready to work Actual specs: Length 5 9/16” Width 1 3/4” Cutter width 1 9/16” Weight 0 lb 12.4 ...
Sargent #207 Block Plane

Sargent #207 Block Plane

<--Back to Sargent Block Planes Sargent #207 Block Plane      1887-1944 Sargent #207 Type 1 Block Plane #207 cut from the 1887 insert Sargent #207 Type 1 Sargent #207 Type 1 Sargent #207 Type 1 Sargent...
Sargent #208 Block Plane

Sargent #208 Block Plane

<--Back to Sargent Block Planes Sargent #208 1910-1944 See the notes on the Sargent #207 Sargent #208 cut from the 1910 catalog Sargent #208 Sargent #208 Sargent #208 VBM Sargent #208 VBM This style...
Sargent #217 Block Plane

Sargent #217 Block Plane

<–Back to Sargent Block Planes Sargent #217 Block Plane 1910-1953 Also see #5217 The basic style of the #207 remained consistent throughout it's production Sargent #217 Block Plane Sargent #217 Block Plane Sargent #...
Sargent #217 VBM Block Plane

Sargent #217 VBM Block Plane

<–Back to Sargent Block Planes Sargent #217 Block Plane 1910-1953 Also see #5217 The basic style of the #207 remained consistent throughout it’s production
Sargent #227 Double End Block Plane

Sargent #227 Double End Block Plane

<–Back to Sargent Block Planes Sargent #227 Double End Block Plane 1901-1943 The basic style remained consistent throughout production Sargent #227 Double End Block Plane Sargent #227 Double End Block Plane Sargent #...
Sargent #306 - #1306 Block Plane

Sargent #306 - #1306 Block Plane

<–Back to Sargent Block Planes Sargent #306 - #1306 Block Plane the "6" indicates the Length (#306 1887-1953) (#1306 1888-1941) Similar to the #307 - #1307 the "7" indicates the Length No. 306, Highly Polished Trimmings, 6...
Sargent #307 - #1307   Block Plane

Sargent #307 - #1307 Block Plane

<–Back to Sargent Block Planes Sargent #307 - #1307 Block Plane the "7" indicates the Length (#306 1887-1943) (#1307 1888-1941) Similar to the #306 - #1306 the "6" indicates the Length No. 307, Highly P...
Sargent #316 - #1316 Block Plane

Sargent #316 - #1316 Block Plane

<–Back to Sargent Block Planes Sargent #316 - #1316 Block Plane the "6" indicates the Length (#316-#317 1887-1941) (#1316-#1317 1887-1918) Similar to the #317 - #1317 Note: These plane caps f...
Sargent #317 - #1317 Block Plane

Sargent #317 - #1317 Block Plane

<–Back to Sargent Block Planes Sargent #317 - #1317 Block Plane the "7" indicates the Length (#316-#317 1887-1941) (#1316-#1317 1887-1918) Similar to the #316 - #1316 Note: These plane caps f...
Sargent #505 Bull Nose Rabbet Plane

Sargent #505 Bull Nose Rabbet Plane

<–Back to Sargent Block Planes Sargent #505 Bull Nose Rabbet Plane 1901-1941
Sargent #507 Adjustable Rabbet Plane

Sargent #507 Adjustable Rabbet Plane

<–Back to Sargent Block Planes Sargent #507 Adjustable Rabbet Plane 1913-1943 This style was consistent throughout production No. 507, Japanned Finish, 7 Inches, 1 7/8 Inch Cutter The Cutter extends through the sides of the Plane a...
Sargent #606 - #1606 Block Plane

Sargent #606 - #1606 Block Plane

<–Back to Sargent Block Planes Sargent #606 - #1606 Block Plane (#606- 1910-1943) (#1606-1910-1941) Similar to the #607 - #1607 No. 606, Highly Polished Trimmings, 6 Inches, 1 3/8 Inch CutterNo. 1606, Nickel-Plated Trimmings, 6...
Sargent #607 - #1607 Block Plane

Sargent #607 - #1607 Block Plane

<–Back to Sargent Block Planes Sargent #607 - #1607 Block Plane (#607 - 1910-1943) (#1607 1910-1918) Similar to the #606 - #607 No. 607, Highly Polished Trimmings, 7 Inches, 1 5/8 Inch Cutter No. 1607, Nickel-Plated Trimmings, 7...
Sargent made Craftsman #306 Block Plane

Sargent made Craftsman #306 Block Plane

Sargent made Craftsman #306 Block Plane Craftsman #619.3704. This is exactly like the Sargent model with the exception of the color. Additional Sargent Block Planes Examples
Sargent No. 1206 & No. 1207 Block Plane

Sargent No. 1206 & No. 1207 Block Plane

<–Back to Sargent Block Planes Sargent #1206 & #1207 Block Plane 1887-1893 No. 1206, Japanned, 6 Inches, 1 3/4 Inch CutterNo. 1207, Japanned, 7 Inches, 1 3/4 Inch Cutter At the time of this publication it is believed that the t...
Sargent No. 2204 Block Plane

Sargent No. 2204 Block Plane

<–Back to Sargent Block Planes Sargent #2204 1913-1943 No. 2204, Pocket Planes, Highly Polished, 4 1/2" Inches, . 1 1/8 Inch Cutter Sargent #2204 as shown in the 1913 catalog
Sargent No. 4206 - No. 5206

Sargent No. 4206 - No. 5206

<–Back to Sargent Block Planes Sargent #4206 - #5206 (#4206 1913-1918) (#5206 1913-1947) No. 4206, Highly polished, 6 ln., 1 5/8 ln. Cutter No. 5206, Nickel-Plated, 6 ln., 1 5/8 ln. Cutter The All-Steel low angle block plane #...
Sargent No. 4306 - No. 4307  Block Plane

Sargent No. 4306 - No. 4307 Block Plane

<–Back to Sargent Block Planes Sargent #4306 - #4307 Block Plane (#4306-#4307 1897-1918) Similar to the Sargent No. 5306 - No. 5307 Block Plane No. 4306, Highly Polished Trimmings, 6 Inches, 1 5/8Inch CutterNo. 4307, Highly Polished T...
Sargent No. 5217 Block Plane

Sargent No. 5217 Block Plane

<–Back to Sargent Block Planes Also see #217 Sargent No. 5217 Block Plane Sargent No. 5217 Block Plane
Sargent No. 5306 - No. 5307  Block Plane

Sargent No. 5306 - No. 5307 Block Plane

back to Sargent Block Planes Sargent #5306 - #5307 Block Plane (#5306-#5307 1887-1950) Similar to the Sargent No. 4306 - No. 4307 Block Plane No. 5306, Nickel-Plated Trimmings, 6 Inches, 1 5/8Inch CutterNo. 5307, Nickel-Plated Trimmings,...
Sargent No. 5607 Block Plane

Sargent No. 5607 Block Plane

<–Back to Sargent Block Planes Sargent #5607 Block Plane Low Angle. With Screw Adjustment. Knuckle Joint.No. 5607, Nickel-Plated Trimmings, 7 Inches, 1 5/8 Inch Cutter In his book "Sargent Planes - Identification and Value Guide" Dave H...

Sargent Combination Planes Nos. 1080 and 1085 Description and Directions for Using - 1943

Click here to see the THE SARGENT HAND PLANE REFERENCE GUIDE FOR COLLECTORS & WOODWORKERS – SECOND EDITION Click here to see THE SARGENT HAND PLANE POCKET INVENTORY WORKBOOK Click here t...
Sargent Hercules Examples

Sargent Hercules Examples

https://www.timetestedtools.net/2023/01/15/a-gallery-of-sargent-hand-planes/ https://www.timetestedtools.net/sargent-transitional-examples/ https://www.timetestedtools.net/2022/04/27/sargent-block-planes/
Hercules #1409 Smoother

Hercules #1409 Smoother

The frog and sole took very little work. The overspray on the frog seats needed to come off. A quick hit with some sand paper on a block of wood took care of it
Hercules #1414 JACK by Sargent

Hercules #1414 JACK by Sargent

And Earlier SARGENT made Hercules #1414 JACK  (adsbygoogle = window.adsbygoogle || []).push({ google_ad_client: "ca-pub-1267137695501695", enable_page_level_ads: true }); (My...
Sargent Hercules #1408 Golden Cutter Smoothing Plane

Sargent Hercules #1408 Golden Cutter Smoothing Plane

Sargent Hercules #1408 Golden Cutter Smoothing Plane Sargent Hercules Examples (My #1408-031523-9)
Sargent Hercules #1409 Smoother

Sargent Hercules #1409 Smoother

Sargent Hercules #1409 Smoother The Sargent Hercules line was an economy line in the 1950s . In my opinion, it's probably the best economy line plane of the day. They make pretty decent users. This one has just been lightly cleaned and sharpened....
Sargent Made Hercules #1408 (a #3 size plane)

Sargent Made Hercules #1408 (a #3 size plane)

Sargent Made Hercules #1408 (a #3 size plane) Sargent Made Hercules #1408 (a #3 size plane) sharpened and ready to woodwork (My #1408-030223-1)Also known as the “Golden Cutter”These plane were made in the 50’s and 60’s, and in my opinion, one of ...
Sargent No. 1107 Hercules Block Plane

Sargent No. 1107 Hercules Block Plane

<–Back to Sargent Block Planes Hercules #1107 Block Plane 1942-1949 No. 1107, Block, 7½ Inches, 1⅝ Inch Cutter. Hercules #1107 Block Plane Hercules #1107 Block Plane box
Sargent No. 1217 “HERCULES Golden Cutter” Block Plane

Sargent No. 1217 “HERCULES Golden Cutter” Block Plane

<–Back to Sargent Block Planes Sargent No. 1217 “HERCULES Golden Cutter” Block Plane 1950-1953 No. 1217, Block, 7 Inches, 1½ Inch Cutter Sargent No. 1217 “HERCULES Golden Cutter” Block Plane Sargent No. 1217 “HERCULES Golden Cutte...
Sargent No. 1217 “HERCULES” Block Plane

Sargent No. 1217 “HERCULES” Block Plane

<–Back to Sargent Block Planes Sargent No. 1217 “HERCULES” Block Plane Sargent No. 1217 “HERCULES Golden Cutter” Block Plane 1950 to 1953 No. 1217 , Block, 7 Inches, 1⅝ Inch Cutter 1942 to 1949 Sargent No. 1217 “HERCULES” ...

Sargent Transitional Examples

Other Sargent Examples
Sargent #3407 Transitional Smoother

Sargent #3407 Transitional Smoother

Sargent No. 3407 Wood-Bottom Smooth Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891.With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3407 , Smooth, ...
Sargent #3408 Transitional Smoother

Sargent #3408 Transitional Smoother

Sargent No. 3408 Wood-Bottom Smooth Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3408...
Sargent #3408 Transitional Smoother Type 1

Sargent #3408 Transitional Smoother Type 1

Sargent No. 3408 Wood-Bottom Smooth Plane Type 1Adjustable Wood-Bottom Planes. Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3408 ...
Sargent #3408 Type 1 Smoother

Sargent #3408 Type 1 Smoother

Sargent No. 3408 Wood-Bottom Smooth Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3408...
Sargent #3408 Type 3 Transitional Smoother

Sargent #3408 Type 3 Transitional Smoother

Sargent #3408 Type 3 Transitional Smoother Note the Sargent design has machine screws holding the frog to the frame. Others have wood screws directly into the wood base. This make for a better design in my opinion. It provides a more solid support for...
Sargent #3408 Type 3 Transitional Smoother

Sargent #3408 Type 3 Transitional Smoother

Sargent No. 3408 Wood-Bottom Smooth Plane Sargent V.B.M Adjustable Wood-Bottom Planes Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane No. 3408...
Sargent #3408 VBM Transitional Smoother

Sargent #3408 VBM Transitional Smoother

Sargent No. 3408 Wood-Bottom Smooth Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891 With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane No. 3408...
Sargent #3410 Type 1 Transitional Smoother

Sargent #3410 Type 1 Transitional Smoother

Sargent #3410 Type 1 Transitional Smoother Note the Sargent design has machine screws holding the frog to the frame. Others have wood screws directly into the wood base. This make for a better design in my opinion. It provides a more solid support...
Sargent #3410 Type 1 Transitional Smoother

Sargent #3410 Type 1 Transitional Smoother

Sargent No. 3410 Wood-Bottom Smooth Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3410...
Sargent #3410 VBM Transitional Smoother

Sargent #3410 VBM Transitional Smoother

Sargent #3410 VBM Transitional Smoother Note the Sargent design has machine screws holding the frog to the frame. Others have wood screws directly into the wood base. This make for a better design in my opinion. It provides a more solid support for the...
Sargent #3411 Transitional Smoother

Sargent #3411 Transitional Smoother

Sargent #3411 Transitional Smoother Sargent No. 3411 Wood-Bottom Smooth Plane Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3411 , Smooth, ...
Sargent #3412 VBM Transitional Smoother

Sargent #3412 VBM Transitional Smoother

Sargent No. 3412 Wood-Bottom Smooth Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891.With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3412...
Sargent #3415 Transitional Jack

Sargent #3415 Transitional Jack

Sargent No. 3415 Wood-Bottom Jack Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3415...
Sargent #3415 Transitional Jack Plane (Rebuilt)

Sargent #3415 Transitional Jack Plane (Rebuilt)

Sargent #3415 Transitional Jack Plane (Rebuilt) Rebuilt with Mahogany sides. Additional Sargent Transitional Examples
Sargent #3415 Transitional Jack Plane Type 2

Sargent #3415 Transitional Jack Plane Type 2

Sargent #3415 Transitional Jack Plane Type 2 Manufactured: From 1891 to 1941 Patents: February 3, 1891 (Horseshoe lateral adjustment) (Granville H. Wright)February 3, 1891 (Second lateral adjustment) (Granville H. Wright)Length: 15 inchesCutter...
SARGENT #3415 TYPE 1 TRANSITIONAL JACK PLANE

SARGENT #3415 TYPE 1 TRANSITIONAL JACK PLANE

SARGENT #3415 TYPE 1 TRANSITIONAL JACK PLANE Sargent No. 3415 Wood-Bottom Jack Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the...
Sargent #3415 Type 1 Transitional Jack Plane

Sargent #3415 Type 1 Transitional Jack Plane

Sargent #3415 Type 1 Transitional Jack Plane Additional Sargent Transitional Examples (My #3415-031923-1)
Sargent #3416 Type 1 Transitional Jack

Sargent #3416 Type 1 Transitional Jack

Sargent #3416 Type 1 Transitional Jack Note the Sargent design has machine screws holding the frog to the frame. Others have wood screws directly into the wood base. This make for a better design in my opinion. It provides a more solid support for...
Sargent #3420 Transitional (Welded)

Sargent #3420 Transitional (Welded)

Sargent No. 3420 Wood-Bottom Fore Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3420 ...
Sargent #3422 Transitional Fore Plane

Sargent #3422 Transitional Fore Plane

Sargent No. 3422 Wood-Bottom Jointer Plane Sargent V.B.M Adjustable Wood-Bottom Planes. Patented February 3, 1891. With Screw Adjustment.With Patent Side Adjustment for exactadjusting of the Cutter with the face of the Plane. No. 3422 ...
Disston #12 Hand Saw

Disston #12 Hand Saw

More infor on the Disston #12 from the Disston institute http://www.disstonianinstitute.com/12page.html (My #12-020223-2)
Disston 12" backsaw

Disston 12" backsaw

Disston 12" backsaw Crosscut @ 13 TPI (My #D-060619-1)
Disston 26" Crosscut D-20 Hand Saw

Disston 26" Crosscut D-20 Hand Saw

Disston 26" Crosscut D-20 Hand Saw Lightly cleaned and filed to clean and freshen sharpening. _ (My #D20-061119-1)
Disston 26″ D8 Crosscut Hand Saw 

Disston 26″ D8 Crosscut Hand Saw 

Disston 26″ D8 Crosscut Hand Saw  Additional Hand Saw Examples (My #D8-020323-5)
Hargreaves, Smith & Co. Crosscut Hand Saw

Hargreaves, Smith & Co. Crosscut Hand Saw

Hargreaves, Smith & Co. 26" Crosscut Hand Saw Additional Hand Saw Examples (My #G-020323-3)
Harvey Peace 12" Backsaw

Harvey Peace 12" Backsaw

Harvey Peace 12" backsaw Crosscut @ 11 TPI
Jefferson 14" Backsaw

Jefferson 14" Backsaw

Jefferson 14" Backsaw
R. Groves & Sons 26″ Crosscut Hand saw

R. Groves & Sons 26″ Crosscut Hand saw

R. Groves & Sons 26″ Crosscut Hand saw Additional Hand Saw Examples (My #RG-020323-4)
Warranted Superior 26" RIP Hand Saw

Warranted Superior 26" RIP Hand Saw

Warranted Superior 26" RIP Hand Saw

Shopping Cart

[woocommerce_cart]
Stanard Rule 18in Fore plane

Stanard Rule 18in Fore plane

Standard Rule History an d information--> Standard Rule Examples
Standard Rule #24

Standard Rule #24

Some more Standard Rule Examples
Standard Rule #37 Transitional Smoother

Standard Rule #37 Transitional Smoother

Standard Rule #37 Transitional Smoother (Jenny) Length is 13"- The Blade is 2 5/8" wide. More Standard Rule info -->           The original page for this plane ---> This plane has been restored. ...
Standard Rule #4 size Smoothing Plane

Standard Rule #4 size Smoothing Plane

Standard Rule #4 size Smoothing Plane As found before a light cleanup More Standard Rule Examples https://www.timetestedtools.net/2016/02/03/standard-rule-co/ (MY...
Standard Rule Co. #3 Smoother

Standard Rule Co. #3 Smoother

Standard Rule Co. - Some Planes and Info Before the restoration More Standard Rule Examples
Standard Rule Transitional Jack Plane

Standard Rule Transitional Jack Plane

Standard Rule Transitional Jack Plane I think this may be a cut down #28, which is advertised at 18" Length is 16 3/4"- The Blade is 2 3/8" wide. More Standard Rule info --> n (My # SR-090220-1)

Stanley

Stanley Type Study---> Stanley Bench Plane Type 1 examplesMore Stanley type 1 Examples Look for Future additions ------------- Stanley Bench Plane Type 2 examplesMore Stanley type 2 Examples Stanley...
Handyman #4 Smoother by Stanley

Handyman #4 Smoother by Stanley

Stanley Handyman #4 Smoother This is the Handyman that i restored in this video series
Stanley #1 Smoother

Stanley #1 Smoother

Stanley #1 Smoother I Have added a picture of what it looked like before restoration. The body has been brazed. I have flattened it, spruced it up a bit and I have been using it since I found it 2 or 3 years ago. The horn on the tote has been repaired...
Stanley #110 Block Plane

Stanley #110 Block Plane

Read this if you're on the fence about a #110 style block plane Stanley #110 Block Plane\n (My #110-082920-3)
Stanley #113 CIRCULAR PLANE

Stanley #113 CIRCULAR PLANE

Stanley #113 circular plane You can see more on circular planes here I believe this is a type 1/2 based on this site,  http://www.oldtooluser.com/typestudy/stanno113cptypestudy.htm A circular plane is a woodworking plane with flexible face adjustable ...
Stanley #12 1/2 Scraper Plane

Stanley #12 1/2 Scraper Plane

The Stanley Gallery (My #12.5-101222-1)
Stanley #12 Scraper Plane

Stanley #12 Scraper Plane

STANLEY #12 Scraper Plane This came to me without a blade. I used a heavy saw blade to make a new blade. A previous user has added a rosewood sole. Based on the square nuts it was most likely done a long time ago. Tested on oak and maple ...
Stanley #12 Sweetheart Scraper

Stanley #12 Sweetheart Scraper

This SW Stanley #12 came to me as an ugly green painted base only. It's been stripped and repainted in my usual way. I turned a handle from spalted Maple. Finish on the maple is BLO. The blade is from a crosscut saw. It sharpened and hooked. ...
Stanley #13 Circular Plane

Stanley #13 Circular Plane

Stanley #13 circular plane (MY #13-181817-3)Stanley #13 Circular plane, 10 1/2"L, 1 3/4"W, 3lbs, 1871-1909.You can see more on circular planes here This is Leonard Bailey's design for a circular plane. It has a flexible steel sole which can be made concave...
Stanley #13 Type 1 & 2

Stanley #13 Type 1 & 2

I'd like to thank an email with further and better information. Note this early and rare plane has it's sole made from a single piece with no hinge. PTAMPIA (page 27) also has an image and information on this plane as well as John Walters guide....
Stanley #190 Rabbet plane

Stanley #190 Rabbet plane

Stanley #190 Rabbet plane, 8"L, 1 1/2"W, 2 1/2lbs, 1886-1962.
Stanley #190 Rabbet plane

Stanley #190 Rabbet plane

Stanley #190 Rabbet plane, 8"L, 1 1/2"W, 2 1/2lbs, 1886-1962.
Stanley #191 Rabbet plane

Stanley #191 Rabbet plane

Stanley #191 Rabbet plane, 8"L, 1 1/4"W, 2 1/4lbs, 1886-1962. >
Stanley #2  Smoother

Stanley #2 Smoother

Stanley #2 Smoother
Stanley #2  Smoother

Stanley #2 Smoother

Stanley #2 Smoother Note the knob seems a little oversized for a #2. I thought about finding a smaller one, but if it's to be a user with someone with larger hands, it seems it would fit well. The orange frog makes it a little harder to find. ...
Stanley #2  Smoother

Stanley #2 Smoother

Stanley #2 Smoother This plane is a nice user #2. It has some pitting on one side and note the gnaw m arks on the cap. Nothing from keeping the plane from being a fine user for another 100 years. The rosewood is original and in excellent shape. ...
Stanley #2 Smoother

Stanley #2 Smoother

Stanley #2 Smoother It has a few imperfections, but nothing from making it a fantastic user. Look close at the photos. The flaws: the peened blade, the low knob, and the hang hole, are all user added, but all I did was give it a quick sharpening and...
Stanley #20 Circular Plane

Stanley #20 Circular Plane

Stanley #20 circular plane Stanley #20 Victor circular plane, 9 1/2"L (10"L 1912 on), 1 3/4"W, 4lbs, 1880-1958. Excerpt from supertool.com: “This plane, and the #20 1/2, are by far the best circular planes ever designed. The design continues to this d...
Stanley #203 Bench Bracket

Stanley #203 Bench Bracket

Stanley #203 Bench Bracket Mainly used to hold a long board against the front of a workbench to facilitate planing the board's top edge. This one still has most of it's japanning. Example of Use    Stanley 203 Bracket typical usage.
Stanley #26 Transitional Jack Plane Type 6

Stanley #26 Transitional Jack Plane Type 6

Stanley #26 Transitional Jack Plane Type 6 1874-1884 Additional Stanley Examples (My #26-031923-4)
STANLEY #27 1/2 TRANSITIONAL – TYPE 16

STANLEY #27 1/2 TRANSITIONAL – TYPE 16

#27 1/2 Jack plane 15"L, 2 1/4"W, 4 3/4lbs, 1898-1934. Stanley (MY #27.5-081017-9)
Stanley #278 Rabbet Plane

Stanley #278 Rabbet Plane

Stanley #278 Rabbet Plan This is a dual-purpose plane - the primary function is to cut rabbets. Complete and in very good shape. A rare find. This is a dual-purpose plane - the primary function is to cut rabbets. The plane is ground on both sides so...
Stanley #29 Transitional – Type 6 – Pre-lateral

Stanley #29 Transitional – Type 6 – Pre-lateral

STANLEY #29 Transitional – Type 6 – Pre-lateral STANLEY  #29 Fore plane 20"L, 2 3/8"W, 6 1/4lbs, 1870-1918. //
Stanley #2C  Smoother

Stanley #2C Smoother

Stanley #2C Smoother repaired front knob bolt
Stanley #3 Smoother TYPE 4 Pre-Lateral

Stanley #3 Smoother TYPE 4 Pre-Lateral

STANLEY #3 Smoother TYPE 4 Pre-Lateral STANLEY #3 Smooth plane, 8"L, 1 3/4"W, 3 1/8lbs, 1869-1984. A nice early example of the Stanley Bailey Jack. Original Japanning about 90% STANLEY #3 Smoother TYPE 4 Pre-Lateral //
Stanley #37 TRANSITIONAL – TYPE 9 JENNY

Stanley #37 TRANSITIONAL – TYPE 9 JENNY

STANLEY #37 Transitional – Type 9 Jenn STANLEY  #37 Jenny plane 13"L, 2 5/8"W, 5lbs, 1870-1923. excerpt from supertool.com - “The name "Jenny" is unique to this plane. Since this plane is slightly shorter than the metallic jack plane, a p...
Stanley #389 JOINTER FENCE

Stanley #389 JOINTER FENCE

Stanley #389 Jointer Fence
Stanley #46 Skewed Adjustable Dado and Plow Plane

Stanley #46 Skewed Adjustable Dado and Plow Plane

Additional Stanley Examples (My #46-090620-1)
Stanley #48 SW T&G Plane

Stanley #48 SW T&G Plane

Stanley #48 SW T&G Plane  A complete Stanley Sweetheart  #48 Tongue and Groove Plane. Include original blades which are typically missing at lease one of them. As written on supertool.com:   “#48 Tonguing and Grooving P...
Stanley #5 Jack (Blue)

Stanley #5 Jack (Blue)

Stanley #5 Jack (Blue) (adsbygoogle = window.adsbygoogle || []).push({ google_ad_client: "ca-pub-1267137695501695", enable_page_level_ads: true });
Stanley #5 Jack Plane

Stanley #5 Jack Plane

Stanley #5  Note the horn was missing and was repaired with my 3 part repair. It still has some paint spatters and japanning is about 70% Blade is sharpened with a camber for a jack plane note the brass replacement for a tote screw. I polished ...
Stanley #62 Low Angle Jack Plane

Stanley #62 Low Angle Jack Plane

Additional Stanley Examples (My #62-081520-1)
Stanley #71 1/2 Router Plane

Stanley #71 1/2 Router Plane

Note the replacement knobs and the irregular adjuster. This adjuster applies downward adjustments only. To raise the blade you would loosen the clamp and manually slide it against the knob. (a replacement adjuster knob could be found on any 71 or 71 1/2...
Stanley #75 Bull Nose Rabbet Plane

Stanley #75 Bull Nose Rabbet Plane

  Stanley #75 Bull Nose Rabbet Plane 4 1/8" Long - 1 1/16" blade (My #75-090520-1)
Stanley #78 Duplex filletster and rabbet plane

Stanley #78 Duplex filletster and rabbet plane

#78 Duplex filletster and rabbet plane, 8 1/2"L 1 1/2"W, 3lbs,       1885-1973. Excerpt for supertool.com "This is another popular Stanley plane, on which the company built a great fortune. Nearly every workman of the time had one of these planes in ...
Stanley #95 butt gauge 

Stanley #95 butt gauge 

Stanley #95 butt gauge  A Stanley No 95 Butt Gauge is Nickel plated cast iron and is used for marking rabbet jams, thickness of butts, mortises and marking, plus for squaring the edge of a butt hinge. - Additional ...
Stanley #A5 Jack Plane

Stanley #A5 Jack Plane

Stanley #A5 Jack Plane STANLEY #A5 Jack plane, 14"L, 2"W, 2 5/8lbs, 1925-1935. The bed and frog on the A5 are made from aluminum, which makes the plane lighter. This was the supposed appeal of these planes, that they are lighter than the iron...
Stanley #S4 Smoothing Plane

Stanley #S4 Smoothing Plane

Stanley #S4 Smoothing Plane offered 1869 - 1984 ..........................9" long with a 2" cutter Additional Stanley Examples (My #S4-031423-4)
Stanley #S5 JACK

Stanley #S5 JACK

STANLEY #S5 JACK This planes only shortcoming is most of the japanning is gone. You may be able to make out a brownish patina in the pictures. That is probably some kind of wax from the care of the previous owner. The blade is in excellent shape....
Stanley 5 1\4 Junior Jack

Stanley 5 1\4 Junior Jack

Stanley 5 1\4 Junior Jack Additional Stanley Examples (My #5.25-031523-5)
Stanley #5 Type 11

Stanley #5 Type 11

Stanley Type 11

Stanley 45 : Seven Planes in One

Download the PDF thanks to Archive.com . (adsbygoogle = window.adsbygoogle || []).push({});
Stanley Bench Plane Type 1 Examples

Stanley Bench Plane Type 1 Examples

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 1 Example of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench Plane type studies were performed...

Stanley Bench Plane type 10 examples

More Stanley type 10 Examples
Stanley #4 Type 10

Stanley #4 Type 10

Stanley #4 Type 10

Stanley Bench Plane Type 11 Examples

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Back to the Type 11 Type Study Type 11 #5 Stanley Bench Plane Type 11 Examples of Stanley Bench plane in other sizes Example of Stanley...
Stanley #4C Type 11 SMOOTHER

Stanley #4C Type 11 SMOOTHER

STANLEY #4C Type 11 SMOOTHER A type 11 Stanley smoother with a sweetheart blade This plane has been stripped and refinished. It’s completely tuned and sharpened. Note the laminated horn repair. The lamination makes it stronger and less likely to b...

Stanley Bench Plane type 12 examples

More Stanley type 12 Examples

STANLEY BENCH PLANE TYPE 13 EXAMPLES

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 13 Stanley Bench Plane Type 11 Examples of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench...
Stanley #3 Sweetheart Smoothing Plane. Type 13.

Stanley #3 Sweetheart Smoothing Plane. Type 13.

Stanley #3C Sweetheart Smoothing Plane. Type 13. Original rosewood knob and tote. No cracks or repairs. I have only oiled them. Lightly cleaned Note some green paint still visible. Note the chip from the rear of the side. Fully tuned, sharpened...

Stanley Bench Plane type 14 examples

More Stanley type 14 Examples
Stanley #3 Type 14 Smoother

Stanley #3 Type 14 Smoother

Stanley #3 Type 14 Smoother
Stanley #4 Type 14

Stanley #4 Type 14

Stanley #4 Type 14
Stanley #6 Type 14 Fore Plane

Stanley #6 Type 14 Fore Plane

Stanley #6 SW Type 14 Fore Plane Type 14 1929-1930 https://www.timetestedtools.net/2016/01/27/stanley-type-14/ The type 14 was the first type to have the raised rib under the front knob.This plane has been lightly cleaned and sharpened. It is...
Stanley Smoother #3 Type 14

Stanley Smoother #3 Type 14

Stanley Smoother #4 Type 14

STANLEY BENCH PLANE TYPE 15 EXAMPLES

More Stanley type 15 Examples
A few Stanley Bench Plane Type 15

A few Stanley Bench Plane Type 15

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 15 Stanley Bench Plane Type 15 Examples of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench...
Stanley #3 type 15 Smoother

Stanley #3 type 15 Smoother

Stanley #3 type 15 Smoother More Stanley type 3 Examples (My # 3-050122-2)
Stanley #4 SWEETHEART SMOOTHING PLANE. TYPE 15.

Stanley #4 SWEETHEART SMOOTHING PLANE. TYPE 15.

STANLEY #4 SWEETHEART SMOOTHING PLANE. TYPE 15. The knob and tote are original.  Actual Plane spec’s · Length 9″ · Width 2 3/8″ · Cutter width 2″ · weight 3# 7.4 oz ...

STANLEY BENCH PLANE TYPE 16 EXAMPLES

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 16 Stanley Bench Plane Type 16 Examples of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench...
Stanley #4 Type 16

Stanley #4 Type 16

Stanley #4 Type 16

STANLEY BENCH PLANE TYPE 17 EXAMPLES

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 17 Stanley Bench Plane Type 17 Examples of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench...
Stanley #5 1/4C Type 17 Junior Jack

Stanley #5 1/4C Type 17 Junior Jack

Stanley #5 1/4C Type 17 Junior Jack (see more on the #5 1/4 story ) AN excerpt from supertool.com "The corrugated version of the #5 1/4 . A tough plane to find, if you're smitten by the collecting bug. It's the scarcest plane of the entire Bailey series ...

STANLEY BENCH PLANE TYPE 18 EXAMPLES

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 18 Stanley Bench Plane Type 18 Examples of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench...

STANLEY BENCH PLANE TYPE 19 EXAMPLES

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 19 Stanley Bench Plane Type 19 Examples of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench...
Stanley #4 Type 19 Smoother

Stanley #4 Type 19 Smoother

Stanley #4 Type 19 Smoother //
Stanley #4 Type 19 Smoother

Stanley #4 Type 19 Smoother

Stanley #4 Type 19 Smoother  Additional examples of type 19's are here
Stanley #4 Type 19/20 Smoother

Stanley #4 Type 19/20 Smoother

Stanley #4 Type 20 Smoother More Stanley type 19 Examples
Stanley #5 type 19

Stanley #5 type 19

Stanley type 19 type study
Stanley #4 Smoother Type 2 Pre-lateral

Stanley #4 Smoother Type 2 Pre-lateral

This Stanley #4 Smoother has a Type 2 base. It has the recessed brass adjuster like a type 4, this could have been changed or it could be from the early type 4 period. The type 2  was made  1869-1872. The Type 4   was made   1874-1884 Note the chi...
Stanley #4 Type 2 Smoothing Plane

Stanley #4 Type 2 Smoothing Plane

A typical Stanley Type 2 #4 (My #4-022423-1)
Stanley #6 Foreplane Type 2 Prelateral

Stanley #6 Foreplane Type 2 Prelateral

STANLEY #6 FOREPLANE TYPE 2 PRE-LATERAL Stanley Type Study --> (My# 6-011323-2)
Stanley #6 Foreplane Type 2 Prelateral

Stanley #6 Foreplane Type 2 Prelateral

Stanley Type Study --> (My# 6-011523-6)
Stanley #6 type 2 fore plane

Stanley #6 type 2 fore plane

(My #6-100320-1) Stanley #6 type 2 fore plane  Here is a type 2 #6. It needs to ask for some forgiveness, but for its usability will not be one of then. The lever cap, cutter and chip breaker are later vintage. The Tote is also a replacement....

STANLEY BENCH PLANE TYPE 3 EXAMPLES

More Stanley type 3 Examples
Stanley #4 Type 3 Smoother

Stanley #4 Type 3 Smoother

Stanley #4 Type 3 Smoother The only issue is a very old repair on the tote. It seems solid. More Stanley type 3 Examples (My #4-090720-2)...
Stanley #4 Pre Lateral Smoother

Stanley #4 Pre Lateral Smoother

Stanley #4 Pre Lateral Smoother  This came to me with a Fulton blade. I’ve added a vintage correct blade, but will send the Fulton. I have NOT tuned this plane in any way. I’ll leave that to the new owner if they decide to use it. I have dom...
Stanley #6 Fore Plane TYPE 4 PRE-LATERAL

Stanley #6 Fore Plane TYPE 4 PRE-LATERAL

Stanley #8 JOINTER TYPE 4 PRE-LATERAL
Stanley #8 JOINTER TYPE 4 PRE-LATERAL

Stanley #8 JOINTER TYPE 4 PRE-LATERAL

STANLEY #8 JOINTER TYPE 4   Pre-Lateral STANLEY #8 Jointer, 24"L, 2 5/8"W, 9 3/4lbs, 1898-1961. See the photo’s they tell the story. A nice early example of the Stanley Bailey Jointer. The japanning was in rough shape when I found it so it’s bee...

Stanley Bench Plane Type 5 Examples

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 5 Stanley Bench Plane Type 5 Examples of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench Plane...
Stanley #7 Type 5 Jointer

Stanley #7 Type 5 Jointer

Stanley #7 Type 5 Jointer 7 Jointer, 22"L, 2 3/8"W, 8 1/8lbs, 1869-1970. Additional Stanley Type 5 Examples

Stanley Bench Plane Type 6 Example

If you have examples that I could add, please email them to me (don at timetestedtools dot net) Type 6 Stanley Bench Plane Type 6 Examples of Stanley Bench plane in other sizes Example of Stanley Bench plane in other sizes. Most Bench Plane...
Stanley #4 TYPE 6 SMOOTHER

Stanley #4 TYPE 6 SMOOTHER

STANLEY #4 TYPE 6 SMOOTHER According to PTAMPIA The Stanley-Bailey Type 6  was    1888-1892 This Plane is completely tuned sharpened and tested Note some minor pitting. See photos and feel free to ask any questions. SEE THE PHOTOS AND FEEL FREE TO ...

Stanley Bench Plane Type 7 Example

More Stanley type 7 Examples

Stanley Bench Plane Type 8 Example

More Stanley type 8 Examples
Stanley #4 SMOOTHING PLANE. TYPE 8.

Stanley #4 SMOOTHING PLANE. TYPE 8.

STANLEY #4 SMOOTHING PLANE. TYPE 8. This plane has been completely restored, tuned and sharpened. See detailed pictures. The blade has some pitting on the top and some minor pitting about 1/4” in on the back opf the cutting edge. Once you’ve sharpened to ...

Stanley Bench Plane type 9 examples

More Stanley type 9 Examples
Stanley  #4 SMOOTHING PLANE. TYPE 9.

Stanley #4 SMOOTHING PLANE. TYPE 9.

STANLEY #4 SMOOTHING PLANE. TYPE 9.  Type 9 Stanley #4  that has been completely restored According to PTAMPIA the type 9 was made 1902-1907 More Stanley type 9 Examples...
Sargent #106 Block Plane

Sargent #106 Block Plane

<--Back to Sargent Block Planes A nice small Sargent #106 block plane. These are known as unadjustable, simply because the adjustment is manual. They are often called Apron planes or finger planes because of their size and because of the finger button....
Stanley #102 Type 1 Block Plane

Stanley #102 Type 1 Block Plane

offered 1876 - 1962 5 1/2" long with a 1 3/8" cutter Small enough for a nail bag or a coat pocket. No adjuster of any kind and that's not always a bad thing. If you keep the blade razor sharp the plane works just fine but if you can't live without...
Stanley #103 Block Plane

Stanley #103 Block Plane

Stanley #103 Block Plane These are sometimes referred to as an apron plane, since they will fit in a pocket offered 1876 – 1950 5 1/2″ long with a 1 3/8″ cutter. 1 (1 1/4″ in early models) Same as the 102 with a lever type adjuster for the...
Stanley #103 Block Plane

Stanley #103 Block Plane

Stanley #103 Block Plane .. These are sometimes called an apron plane since they are small enough to fit in an apron pocket https://www.timetestedtools.net/2019/05/22/the-simple-block-plane/ (My 103-022423-1)
Stanley #110 Block Plane With Original Box

Stanley #110 Block Plane With Original Box

Stanley #110 Block Plane With Original Box (My #110-082420-1)
Stanley #130 Double End Block Plane

Stanley #130 Double End Block Plane

Stanley #130 Double End Block Plane Note the bull nose end guard has was broke off. Japanning is original and about 65-75% Stanley Block Plane Examples
Stanley #140 Skewed Rabbet & Block Plane

Stanley #140 Skewed Rabbet & Block Plane

Stanley #140 Rabbet and block plane, 7"L, 1 3/4"W (1 5/8", 1936 on), 1 1/8lbs, 1896-1944. Quote from Supertool.com "This is a very useful plane, and is one of Stanley's better products (it would have been even better if they didn't supply it with the...
Stanley #15 Block

Stanley #15 Block

The #15 is the same as a #9 1/2 except it is 7" long instead of 6". These are a bit harder to find. This block plane has been tuned and sharpened and is ready to go to work. ____ ...
Stanley #15 BLOCK Plane

Stanley #15 BLOCK Plane

STANLEY #15 BLOCK Plane The #15 is like the Stanley #9  1/2 except it is 7" long instead of 6. It's also harder to find.
Stanley #18 1/4 Knuckle Block Plane

Stanley #18 1/4 Knuckle Block Plane

Stanley #18 1/4 Knuckle Block Plane This came with the red paint. I did not try to remove it. Stanley Block Plane Examples (My #18.1-4-090920-6)
Stanley #18 Knuckle Block Plane

Stanley #18 Knuckle Block Plane

Stanley #18 Knuckle Block Plane
Stanley #18 Type 6 Block Plane

Stanley #18 Type 6 Block Plane

Stanley #18 Type 6 Block Plane Lightly cleaned and sharpened.
Stanley #19 Block plane

Stanley #19 Block plane

Stanley #19 Knuckle Block plane, 7"L, 1 5/8"W, 1 5/8lbs, 1888-1949. The #19 is just like the #18 but 1" longer. n
Stanley #60 1/2 Block Plane

Stanley #60 1/2 Block Plane

Stanley #60 1/2 Block Plane    Stanley #60 1/2 Block Plane  Stanley Block Plane Examples
Stanley #65 1/2 Block plane

Stanley #65 1/2 Block plane

Stanley #65 1/2 Block plane #65 1/2 Block plane, 7"L, 1 5/8"W, 1 3/8lbs, 1902-1950. (ref supertool.com). It is Identical to the #60 1/2, except that its iron is wider, and a little harder to find. According to supertool.com, the cap and front knob...
Stanley #9 1/2 Type 4

Stanley #9 1/2 Type 4

I believe this is a Stanley #9 1/2 Type 4 but I believe the cap is a little later (or??) This can be a user or collector or both. Plenty of life left in the blade. I have only done a quick sharpening  (it needs more to use it) I slid a washer under...
Stanley #9 1/2 type 8a Block Plane

Stanley #9 1/2 type 8a Block Plane

Stanley #9 1/2 type 8a Block Plane I believe this is a type 8a A very usable block plane with a bit of a cool factor. Old enough to be really vintage. It's got some faults, but nothing from keeping it from being a go to block plane. ...
Stanley #9 1/4 Block Plane

Stanley #9 1/4 Block Plane

STANLEY #9 1/4 BLOCK  Additional Stanley Block Plane Examples
Stanley 60 1/2 Block Plane

Stanley 60 1/2 Block Plane

Stanley 60 1/2 Block Plane. Blade is marked No. 60 1/2P (13-060A) Although this is a newer model, this is still arguably one of the best user block planes Stanley made. I know a lot of woodworkers who swear by the 60 1/2. This one came to me in pretty...
Stanley 60 1/2 Block Plane

Stanley 60 1/2 Block Plane

Stanley 60 1/2 Block Plane 6"L, 1 1/2"W, 1 1/4lbs, 1902-1982. The standard low angle block plane most of us recognize. This plane is very popular due to its size - it fits nearly completely in an average-sized hand - and its weight makes it ideal for...
Stanley 9 1/2 Block Plane

Stanley 9 1/2 Block Plane

Stanley 9 1/2 Block Plane Additional Stanley Block Plane Examples
Stanley 9 1/2 or 9 3/4 Type 5

Stanley 9 1/2 or 9 3/4 Type 5

As found a pretty cool piece. The pictures tell the story. I believe it's a type 5 with a bronze cast tail.  (1880-1885)   (My # 95-082620-1)

Stanley Block #9 1/2

Back to Random Plane List  Stanley #9 1/2 Block    9.5-101916-1 Back to Random Plane List          //
Stanley Block Plane #102

Stanley Block Plane #102

#102 Block plane, 5 1/2"L, 1 1/4"W (1 3/8", 1914 on (1 5/16, 1962), 7/8lb, 1877-1962. Completely restored, stripped, repainted sharpened and ready for work. // Additional Stanley Block Plane Examples

Stanley TWO TONE #110 (?) BLOCK PLANE.

STANLEY Two Tone #110 (?) BLOCK PLANE.  

Stanley Dating links

Stanley - Type 1 - Type 2 - Type 3 - Type 4 - Type 5 - Type 6 - Type 7 - Type 8 - Type 9 - Type 10 - Type 11 - Type 12 - Type 13 - Type 14 - Type 15 - Type 16 - Type 17 - Type 18 - Type 19 - Type 20 - Bases - Cutters
Defiance #1204 Smoothing Plane by Stanley

Defiance #1204 Smoothing Plane by Stanley

This is a cleaned Defiance #1204 Smoothing Plane. It’s been sharpened and tuned and only lightly cleaned. This is a great low cost smoothing plane. The knob an d tote are original with most of the original finish missing. Japanning (or actually g...
Defiance #1204 Smoothing Plane by Stanley

Defiance #1204 Smoothing Plane by Stanley

Defiance #1204 Smoothing Plane by Stanley https://www.timetestedtools.net/2016/01/27/stanley-defiance-line/
Defiance #1205 Jack

Defiance #1205 Jack

Defiance #1205 Jack      Back to the Defiance Page (My# 1205-011523-2)
Defiance #1213 1/2 by Stanley

Defiance #1213 1/2 by Stanley

Stanley Defiance #1213 1/2                                      Back to the Defiance Page This is said to be the the rarest or one of the rarest Defiance planes. They were only made from 1929 – 1932 according to “Antique and Collectible Stanley Tools: Guide t...
Defiance #1213 by Stanley

Defiance #1213 by Stanley

Stanley Defiance #1213 This Stanley Defiance makes a pretty decent scrub plane. The blade has been sharpened with a camber and the mouth is already wide enough for some good size shavings. Here is my write up on Defiance Actual specs: Length 9” ...
Defiance #1244 by Stanley

Defiance #1244 by Stanley

Stanley Defiance #1244 This Stanley Defiance makes a pretty decent scrub plane, although it has a chip breaker so may work as a very light smoother. The blade has been sharpened on this plane, it is as I found it.. Here is my write up on Defiance Actual...
Defiance #1244 by Stanley

Defiance #1244 by Stanley

Stanley Defiance #1244 Here is my write up on Defiance Actual specs: Length 9 1/4” Width 2 1/8” Cutter width 1 13/16” Weight 2 lb 2.4 ozs
Defiance #1245 Jack Plane by Stanley

Defiance #1245 Jack Plane by Stanley

This is a cleaned Defiance #1245 jack plane. Defiance makes a great low cost jack plane for the woodworker who only needs a hand plane occasionally. The defiance 1245 never had a lateral adjustment mechanism so they are ideal for a light weight jack...
Defiance #205 Block Plane by Stanley

Defiance #205 Block Plane by Stanley

Defiance #205 Block Plane by Stanley Description from hansbrunnertools.com offered 1927-1934 6 1/4"  long with  a 1 1/2" cutter Pressed/folded steel construction. Originally part of the Stanley tool chest for boys, later integrated...
Siegley #5 Jack Plane

Siegley #5 Jack Plane

Back to Jacob Siegley Hand Planes Stanley Siegley Hand Plane Examples
Stanley Siegley #18 Block Plane

Stanley Siegley #18 Block Plane

Back to Siegley History Stanley Siegley Hand Plane Examples (My # S-021223-4)
Stanley Victor #1104 Smoothing Plane

Stanley Victor #1104 Smoothing Plane

Back to The Victor Planes By Stanley
Stanley Victor #1120 Block Plane

Stanley Victor #1120 Block Plane

Back to Victor Planes by Stanley---> (My# 1120-021223-1)

Thank You

Thank You For Your Purchase
Union #120 Block Plane

Union #120 Block Plane

Union #120 Block Plane I think the cap has been restored. Body is original.

Union #227 BLOCK PLANE

Union #227 Block Plan I believe this is a Union #227 with a replacement blade.

Union #3G Smoother

  Union #3G Smoother Length 8” base 9” with overhang Blade width 1 3/4” weight 2lbs 14 ozs   An original Union 3G made with the patented lateral adjuster Note the “Patent Applied for” on the lateral. Accordin...
Union #4 Smoother

Union #4 Smoother

Union #4 Smoother A little later Union, although not all parts are likely original. The tote and tote bolt may be from a war time Stanley or another line. The Plane itself is likely from after the Stanley acquisition. The Blade is the heavier (7/64")...
Union #4 Smoother

Union #4 Smoother

Union #4 Smoother This is an early Union smoother.

Union #5 Jack .(Early Real Union)

  Union #5 Jack .(Early Real Union) This is an early Union plane with the original x-series type lateral adjuster. This plane has been completely restored (including stripping and refinishing) and tuned and sharpened as a jack. The iron is...
Union #5C Jack Plane

Union #5C Jack Plane

Union #5C Jack Plane A Union 5C Jack plane with a new Hocktools.com High Carbon Tool Steel (O1) Blade. The picture tell most of the story but note the repaired horn and the missing chunk from each side of the knob base. All-in-all this is a beautiful...

User

[ultimatemember form_id="35087"]
Vintage Hand Plane Examples

Vintage Hand Plane Examples

Follow the links to see photographic examples and history. Be sure to follow the category links on the right as well for articles and post. Bedrock Examples Birmingham Examples Chaplin Examples Consolidated Tool Examples Display...
Winchester #3004 Smoother

Winchester #3004 Smoother

Winchester Hand Plane Home Page-->
Winchester #3005 Smoother

Winchester #3005 Smoother

Winchester Hand Plane Home Page–>
Winchester #3020 Jointer Plane

Winchester #3020 Jointer Plane

Winchester Hand Plane Home Page–>
Winchester #3093 Block Plane

Winchester #3093 Block Plane

Winchester #3093 Block Plane Like a Stanley #110 Back to Winchester Hand Plane Home Page–> The Simple Block Plane--> (My #3093-021223-2)
Winchester #3404 Smoother (Sargent Made)

Winchester #3404 Smoother (Sargent Made)

Winchester #3404 Smoother (Sargent Made 408C) Corrugated A fantastic woodworking hand plane or a Nice collectible Winchester piece. Note the knob was cracked at the base, so it has been reinforced to prevent further breakage. ...
Winchester Pocket Catalog Of Tools 1923

Winchester Pocket Catalog Of Tools 1923

  Order on Amazon Follow me on Amazon A reprint of the 32 page “Winchester Pocket Catalog Of Tools 1923” catalog. This catalog has their hammers, saws, axes, chisels, hand planes, files, pliers and more.Tool collectors use original catalogs to ...
Sargent #710C from Steve Crow’s collection

Sargent #710C from Steve Crow’s collection

This Prototype Sargent #710C from Steve Crow’s collection was feature in The Sargent Hand Plane Reference Guide for Collectors & Woodworkers - Second Edition Additional Zenith Marshal Wells Examples
Zenith Marshal Wells #776 BB Transitional Smoother

Zenith Marshal Wells #776 BB Transitional Smoother

I believe all Zenith planes were made by Sargent. There was a time when I thought all Zenith bench planes were Shaw patents, although there were some transitionals as well. I have since seen some examples of the #400 series stamped with Zenith. · ...

Leave a Reply