Note: I’ve had some reports of messages not coming through. If I don’t answer in 24 hours, there is a good chance I didn’t get the message. I can also be emailed at timetestedtools at hotmail dot com.

 

Some Info

  • shipping cost are now included        (US Shipments ONLY).
  • Offers and trades always welcome.
  • If you need more information or want to see more pictures feel free to ask…….. (US Shipments ONLY)
  • For Anything larger or multiple items contact me. or email timetestedtools AT hotmail . com

I can’t always keep this list up to date and often have a few items in the works. Contact me if you are looking for something in particular and its not listed.

Please Read before making a purchase.

Here is a list of planes ready to go. I’ll post more picture if you need them. If its marked restored its been stripped and repainted with multiple coats of Dupli-Color Engine Enamel DUPDE1635 Ford Semi Gloss Black spray paint. Feel free to ask any questions.

    • Unless otherwise marked, the iron has been hollow ground on an 8” aluminum Oxide white wheel, then honed on a hard oil stone.
    • Back of the iron edge will be polished (the cutting edge only)
    • Sole is flat to a working degree.
    • Frog has been flattened (flattened, not polished. Polishing effects cutter slippage)
    • All restore and tuned planes have been tested.
    • Planes marked “As found” are as I found them.
    • I do NOT verify the sides of the planes are 90 degrees from the sole. If you plan to use the plane for shooting, check with me first.

You can now order a Time Tested Tools apparel      https://represent.com/store/time-tested-tools

For Books And Catalogs for sale Click this link

**************************************************************************************************************

 

BLOCK PLANES

**************************************************************************************************************

Stanley (I think) #103 Block (my # 110-053117-1)   $24

Here is a #102 exactly as I found it. I’ve never seen a blade like this before. I haven’t even sharpened it and it works ok.

18739714_222067971642390_5227745009570135727_n18740174_222068011642386_8272391216001632134_n18740482_222067994975721_6452994488053901450_n18740553_222067951642392_9044063141238622315_n

(US Shipments ONLY)

**************************************************************************************************************

Stanley #9 1/4 Block (my # 9.1-4-020517-1)   $40

As found. In good condition. An easy cleanup. Sharpen and go.

IMG_20170203_141457655IMG_20170203_141503394IMG_20170203_141509651IMG_20170203_141701072

(US Shipments ONLY)

**************************************************************************************************************

Stanley #9 1/2 Block (my # 9.5-101916-1)   $45

As found. In good condition. An easy cleanup. Sharpen and go.

IMG_20161022_090505567IMG_20161022_090528684IMG_20161022_090542837IMG_20161022_090644229

(US Shipments ONLY)

**************************************************************************************************************

Stanley #18 Knuckle Block (my # 18-102116-1)   $48

  • Tuned and sharpened
  • Missing the eccentric lever
  • note the very Small chip from behind the mouth
  • The blade is marked “Trade Mark…Logan Gregg…Sterling”. Seems its another hardware firm out of PA.

IMG_20161022_105251759IMG_20161022_105902540IMG_20161022_110033916IMG_20161022_110055407IMG_20161022_110126147

(US Shipments ONLY)

**************************************************************************************************************

Stanley made Lakeside (House brand of Wards) # 220 block (my # 220-012917-1)   $32

  • given a quick Tuning and sharpening

IMG_20170129_121421373IMG_20170129_121427316IMG_20170129_121448778IMG_20170129_121754101IMG_20170129_121917755

(US Shipments ONLY)

**************************************************************************************************************

Stanley #18 Knuckle Block (my # 18-081716-1)   $48

  • Tuned and sharpened
  • Missing the eccentric lever
  • Small chip from behind the mouth

IMG_20160715_150950911_HDRIMG_20160715_150959613IMG_20160715_151003658_HDRIMG_20160715_151014289IMG_20160715_150945259_HDR

(US Shipments ONLY)

**********************************************************************************

J Pearce coffin plane $42

Chapin-Stevens blade

IMG_20161022_144938026IMG_20161022_145016721IMG_20161022_145030302IMG_20161022_145053636IMG_20161022_145227938

(US Shipments ONLY)

 

**********************************************************************************


Planes I have made


An Infill shooter. $515

Bedded at about 38 degrees Iron at 30 degrees.

Walnut infill

Length 10”

Width 2 1/4”

WP_20131223_010WP_20131223_009WP_20131223_008WP_20130417_010

(US Shipments ONLY)

**********************************************************************************

**********************************************************************************

dw made Infill Smoother. $365 OBO (my number infil3-082315-3)

Trades Welcome especially if they are collector type vintage plane.

The Infill is Morada with a hand rubbed Truoil Finish

–Bedded at 50 degrees

–1 3/4” single 3/8” iron

–Approx 7” long

–1/2” steel sole

–The sole was made from – 1/2 X 2 1/2 X 24 LOW CARBON FLAT STOCK

–Sides were made from –  1/8 X 5 X 24 LOW CARBON FLAT STOCK

–360 Brass pins

–Blade is O-1 hardened to RC62

–Blade has had the back flattened and polished for a great cutting edge

–Sharpened with 25 degree hollow grind and final honing done one a hard Arkansas stone.

Custom plane hammer will be included.

IMG_20150501_164858779IMG_20150426_144736066IMG_20150426_153938924IMG_20150426_153947699IMG_20150426_154004577IMG_20150501_164643660IMG_20150501_164654390IMG_20150501_164727762

(US Shipments ONLY)

**********************************************************************************

dw made Infill Smoother. $565 OBO (my number totedinfil-082315-5)

Trades Welcome especially if they are collector type vintage plane.

The build id documented here making-the-2015-toted-smoother-infill

The Infill is walnut with a hand rubbed Truoil Finish

–Bedded at 50 degrees

–2” Hock Iron

–Approx 9” long

–The sole was made from – 1/2 X 2 1/2 X 24 LOW CARBON FLAT STOCK

–Sides were made from –  1/8 X 5 X 24 LOW CARBON FLAT STOCK

–360 Brass pins

–Blade is O-1 hardened to RC62

–Blade has had the back flattened and polished for a great cutting edge

–Sharpened with 25 degree hollow grind and final honing done one a hard Arkansas stone.

IMG_20150418_152037520IMG_20150418_152043041IMG_20150421_083925392IMG_20150421_083941635IMG_20150421_104433351IMG_20150418_162226378

(US Shipments ONLY)

**********************************************************************************

Small 7” wood bodied smoother $145 (OBO)

This plane is made from butternut and cherry with a hophornbeam sole pad. If you don’t know, hophornbeam is one of the hardest wood grown in the North East. I’ve known it as hardhack my whole life.

It’s 7” long and 2 7/8” wide and had a Hock 2” cutter and cap iron.

–Bedded at 50 degrees

Finish is several coats of hand rubbed truoil.

IMG_20150806_100222404IMG_20150806_100346441IMG_20150806_100353068IMG_20150620_111622314IMG_20150806_100359170IMG_20150620_094528588IMG_20150620_161039076

(US Shipments ONLY)

**********************************************************************************

Small 7 3/4” wood bodied smoother $145 (OBO)

This plane is made from rosewood and hophornbeam. If you don’t know, hophornbeam is one of the hardest wood grown in the North East. I’ve known it as hardhack my whole life.

It’s 7 3/4” long and 2 1/2” wide and had a Hock 1 1/2” cutter and cap iron.

–Bedded at 50 degrees

Finish is several coats of hand rubbed truoil.

IMG_20150806_120944503IMG_20150806_120959876IMG_20150806_121005871IMG_20150806_121014457

(US Shipments ONLY)

**********************************************************************************

Small 8”” wood bodied smoother $135 (OBO)

This plane is made from oak and hophornbeam. If you don’t know, hophornbeam is one of the hardest wood grown in the North East. I’ve known it as hardhack my whole life.

It’s 8” long and 2 5/8” wide and had a Hock 1 3/4” cutter and cap iron.

Finish is several coats of hand rubbed truoil.

IMG_20150806_122338130IMG_20150806_122408948IMG_20150806_122417736.

(US Shipments ONLY)

**********************************************************************************

Misc PLANES

******************************************************************************************************************************************************************************************************************************************************