Here is one of my masterpieces.

This is a #3 size. Donor sole is a defiance #3.
Wood is epoxied into the sole with the rear piece pinned as well.
Wood is wenge. Accent on front is Ash.
Bedded at 55 degrees.
Hock iron.
I made the chip breaker.
Finish is 1-1-1
Cap is brass.

clip_image001clip_image002clip_image003

So here is the start of the chip breaker.

clip_image004clip_image005clip_image006clip_image007clip_image008clip_image009clip_image010

This one didn’t make the cut. I opted for a single DW on the cap screw. I’ll save this for future use.

clip_image011clip_image012clip_image013clip_image014clip_image015clip_image016clip_image017clip_image018clip_image019clip_image020clip_image021clip_image022clip_image023

This is smoothing some Ash

clip_image024clip_image025clip_image026

A thicker take on some poplar

clip_image027clip_image028clip_image029clip_image030clip_image031clip_image032

And some oak to make sure its working as it should.

clip_image033clip_image034

Thanks for stopping by.