Making the 2015 Toted Infill Smoother Part 1

Shop Timetestedtool's tool Store ......... And The Etsy Shop

I’ll start with an order of metal from Enco. 1/2″ thick for the base, and 1/8″ thick for the sides.
Here is the Enco stock numbers
415-1701 1/2 X 2 1/2 X 24 LOW CARBON FLAT STOCK
415-0221 1/8 X 5 X 24 LOW CARBON FLAT STOCK
clip_image001

I had an idea of what I wanted it to look like. This is the first time I made a wooden model to get the proportions correct.

clip_image002

Cutting on the band saw is much easier and faster than a hacksaw, but if your only making one or two, a hacksaw or sawzall can be used

clip_image003clip_image004

I wound up evening up the sides with the belt sander. A milling machine would sure come in handy at this stage, but I don’t have access to one, and this gets the job done. I use 80 grit

clip_image005

I cut the sides and clamped them together. The third one will act as a template. I hope to be making a few more of these. I then filed them even

clip_image006clip_image007clip_image008clip_image009clip_image010clip_image011

Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 Part 7

Next —–>                

________________ As an Amazon associate, we earn income from qualifying purchases when you click on a link. Your link clicks help us fund our website. ________________